Automatic Butt Fusion Machine V200 CNC 50MM-200MM/Plastic Pipe Welding Machine

NegotiableUpdate on November 07

Model

Nature of the Manufacturer: Other

Product Category: Construction Machinery

Place of Origin: City, Province

Online Consult Contact Information

Overview

Short Description: CategoriesAutomatic Butt Fusion MachinesModelV200 CNCCertificateCE, ISO9001Packing MaterialPlywood BoxMOQ1setFOB portShanghaiTerms of PaymentL/C, Western Union, T/T

Product Details

DESCRIPTION

V-CNC series automatic hydraulic butt welding machine V200 CNC is applied to joint PE, PP, PPR and PVDF pipes and moulded fittings.

Selection of components with a long service life ensures a low maintenance and repair, friendly and reliable operation.

PARAMETERS

Product Details
WELDING RANGE O.D.	50MM – 200MM	PISTON AREA	6.27 CM²
POWER SUPPLY	220V±10%, 50/60HZ	TEMPERATURE RANGE	MAX. 320ºC
HEATER POWER	1.5KW	PACKING DIMENSION	820400440 MM
TRIMMER POWER	0.75KW		450470550 MM
PUMP POWER	0.75KW		650340380 MM
WORKING PRESSURE RANGE	0 – 80 BAR	GROSS WEIGHT	156KGS

V-CNC series Characteristics
WELDING CONTROL SYSTEM	FULLY MONITORED BY CNC CONTROL UNIT
DATA LOGGING CAPACITY	2000 REPORTS
WELDING MONITORING SYSTEM	AMBIENT TEMPERATURE, INPUT VOLTAGE, HEATING TEMPERATURE, WELDING PRESSURE, WELDING TIMES, HEATING OPERATION, TRIMMING OPERATION, MEMORY CONTROL.
LANGUAGES	AVAILABLE UPON REQUEST
WARRANTY PERIOD	2 YEARS

FEATURE

Basic Frame

7539214

- Oil seal kit, origins from Germany, make sure that the pressure performance stays in a more stable way.

- 4 sets quick coupling helps the operator to prepare the machine better before and after welding, and we use STUCCHI which from Italy ensures no hydraulic oil leakages when unplugging or plugin.

- Using an integral shaft (top chromate treatment) instead of the assembled shaft, ensure the chassis strength to avoid possible frame twist or deform when dragging the pipe with extreme parameters.

Heating Plate

- We use Dupont from the USA for coating the heating plate, which is the best in the industry. It’s many stickers on an aluminum plate, more non-sticky to plastic pipes surface. The temperature deviation of different points on the heating plate is 2-3 degrees (small size machine) and 5-6 degrees (big size

Trimmer

Featured by

- High-quality drill, which can do 220V, 3phase as an option.

Electrical box Assy.

Featured by

- Temperature-controlled switch when the temperature-controlled switch is off, all the aviation plugs are not live, even the power cable connected with the power source. It is quote safe to connect or disconnect the plugs before or after welding.

- Very well-connected wires and a more reasonable layout. Each wire is marked with the corresponding numbers, thus giving more convenience to do the troubleshooting when a failure happens.

Automatic Control Box

7540636

- The CNC hydraulic control box is available for all RIYANG basic model machines, covering the size from O.D 50mm through O.D 1200mm. A fully encased control box makes the protection level up to IP 54.

- Due to the unique powertrain, it could not only create sufficient hydraulic power during the welding procedure but also makes sure precise control. And most importantly, it greatly reduces the weight of the control box. And the servo-motor applied significantly reduces the failure possibility and maintenance cost.

- All connections sockets are located at the back of the hydraulic control unit, including sockets for the trimmer tool and heating plate. No additional power distributor is needed.

- Various welding standards (DVS, ISO, WIS, etc.) could be pre-installed by different languages upon your request. All welding reports could be saved immediately to internal memory with a capacity of 2000 reports after welding accomplished, or print the report. Meanwhile, it is available for downloading through the USB interface.

- V-CNC series hydraulic control box is featured with PLC touch screen, extremely user-friendly RFID access technology. Troubleshooting and program upgrades are available for remote control.

- When the heating plate hooks up with the machine chassis, inserting or release the heater will be controlled remotely by a hydraulic unit, which is the same as a trimmer. These characteristics prevent the operators from being injured.

OPTION