Welcome Customer !

Membership

Dalian Refine Tech Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 数控机床

Xwboo>Products

Dalian Refine Tech Co., Ltd.Free·1YRS

  • E-mail

    info@dlrefine.com

  • Phone

    0086-15640835699

  • Address

    North Union Building, 6 Baoling Street, Harbin Road,Development Zone, Dalian, China.

Contact Now

KLD Series Screw Motor Generator Set

Model
Nature of the Manufacturer
Other
Product Category
Other Products
Place of Origin
City, Province
Overview
Short Description: The screw motor set is a new type of power machine developed on the basis of screw compressor. It has all the advantages of screw compressor, simple structure, stable operation, easy maintenance, durable; It is the only power machine that can adapt to steam and water two-phase full flow medium. It is the ideal technical equipment for energy saving, consumption reduction, emission reduction, efficiency improvement and environment purification in current industrial enterprises. It has fi......
Product Details

Technical characteristics of screw motor:

  1. The screw power machine has the advantages of simple structure, small size, small vibration, safe, reliable and durable, simple operation and convenient maintenance.
  2. The screw power machine is a positive displacement power machine. The gap between the components is small. Under general working conditions, the design speed of the equipment is 1500-5000r/min, the internal flow rate is low, and high internal efficiency can be obtained
  3. Screw engine suitable for saturated steam, steam liquid two, high pressure hot water and other medium, because of the unique structure characteristics of double rotor shearing effect of non-contact features formed during operation with self-cleaning function, so the runtime of working medium quality no special requirements, can adapt to low quality and not clean heat source working medium work is done.
  4. The efficiency of the screw power machine does not decrease significantly with the change of the load under the condition that the working medium parameters and load change greatly, and the operation is stable and safe and reliable
  5. Screw power machine rotor rigidity, super speed, not like steam turbine “speed” major accidents; Large starting torque, can start directly with load
  6. Screw motor speed can be stepless adjustment.
  7. For non-steam heat sources (such as furnace smoke, waste steam, hydrothermal, hot water, etc.), the screw power machine can work according to the thermodynamic triangle cycle, with small heat loss and high cycle efficiency. Under the same conditions, the power recovery is 15% higher than that of the turbine Rankine cycle.

Application of screw motor heat source parameter range

According to different heat source conditions, it can be divided into two forms: direct use of heat source and indirect use of heat source. Direct heat sources are mainly steam with moderate parameters, boiler high pressure continuous row, fixed drainage, etc., which can be directly or after temperature reduction and decompression treatment into the screw power machine to expand and recover energy. Indirect heat sources usually can not be directly used by the screw power machine, and can be used after heat exchange between the equipment and the specific working medium.

 

Range of heat sources available directly:

Steam Parameters: 0.3Mpa(g)-3.0Mpa(g), temperature<300℃

Hot Water Parameters: More than Pressure 3Mpa(g)Boiler row, drainage quota

 

The range of heat sources available indirectly:

Flue gas, exhaust gas parameters: temperature > 300℃ all kinds of flue gas, exhaust gas —– through the waste heat boiler recovery heat energy, steam after use.

Steam parameters: Under pressure < 0.1mpa (g) saturated steam and wet steam —- and low boiling point working medium after heat transfer, energy recovery and utilization

Hot water parameters: under pressure < 0.8mpa (g), temperature > 70℃ hot water —- and low boiling point working medium after heat exchange, energy recovery and utilization.

KLD Series Screw power generator unit specifications and models

ModelPower kwSpeed rpmMain Machine weight tOverall Size LXBXH
KLD204-F20-1002000-60000.533.0X1.6X1.8
KLD255-F50-4001500-40001.243.3X1.7X2.1
KLD321-F100-6001000-30002.073.7X1.8X2.3
KLD408-F300-12001000-30003.814.1X1.9X2.5
KLD510-F400-30001000-50006.124.5X2X2.8

KLD Series Outline drawing of screw motor generator set

KLD 动力机

KLD Series Screw motor direct tow type Unit Specification and model

ModelPower kwSpeed rpmMachine weight tOverall Size LXBXH
KLD204-Z20-1002000-60000.531.8X1.6X1.8
KLD255-Z50-4001500-40001.242X1.7X2.1
KLD321-Z100-6001000-30002.072.3X1.8X2.3
KLD408-Z300-12001000-30003.812.6X1.9X2.5
KLD510-Z400-30001000-50006.122.9X2X2.8

KLD Series Outline diagram of direct tow type screw motor unit

KLD 直拖



Similar Product Recommend