Design Feature:
- Standardized design: conforms to API682 “shaft seal system for centrifugal rotary pump”.
- Reliable quality: The product can be implemented in accordance with the Quality Control Manual of Pressure Vessels and their parts constructed in ASME Boiler and Pressure Vessels Code, Volume VIII, Part 1 or Safety Technical Supervision Regulations for Stationary Pressure Vessels
- Change cold and heat: a cooling tube is fitted to cool buffer or spacer
- Level display: A pressure plate type level gauge is used to facilitate liquid level inspection
- Configuration diversity: Remote control is achieved by deploying domestic and foreign instrumentation and transmitter according to different requirements
- Convenient installation: Standard configuration product interface adopts ASME B16.5 flange standard (or is configured according to special requirements) to facilitate the fitting of process pipeline.
- System material: 304,316 L and other materials are available.
Limitation Performance Parameters
| Model | Heat Exchange area(m2) | Using Pressure(Mpa) | Temperature(℃) | Total volume(L) | Working volume |
| CR5012 | 0.3 | 0-5.0 | -40-200 | 16.6 | 12L(3 Gal ) |
| CR5020 | 0.4 | 0-5.0 | -40-200 | 27.8 | 20L(5 Gal) |
Solution:
Plan52 The solution is mainly used for the series mechanical seal without pressure buffer through the liquid storage tank, the pump ring in the integrated seal to provide circulation power, mainly used in easy vaporization, flash hydrocarbon and dangerous toxic and harmful solution medium, the buffer pressure in the liquid storage tank is atmospheric pressure: If the leakage from the medium side seal directly enters the atmospheric side seal, the pressure in the liquid storage tank rises, and then it is discharged from the empting pipeline. The sealing leakage can be judged by the liquid level indicated by the level gauge on the liquid storage tank. The selection of buffer should be consistent with the nature of the process medium, and the pressure switch sets the high pressure alarm.
Alarm value common: 0.1Mpa.

Solution:
Plan53AThe scheme is mainly used in series or double end mechanical seal the pressurized spacer through the savings tank, and the pump ring in the integrated seal provides circulation power, mainly used in easy vaporization, flash hydrocarbon involved in high temperature, dangerous, toxic and harmful; In the medium with easy crystallization and impurities, the isolator pressure in the liquid storage tank is higher than the medium pressure (0.14-0.17mpa); If the medium side seal leaks, the isolator in the liquid storage tank will enter the sealed medium to prevent the sealing medium from leaking into the atmosphere. The sealing leakage can be judged by the liquid level indicator on the liquid storage tank. The choice of isolator should be consistent with the nature of the process medium, and the pressure switch sets low pressure alarm.
Alarm value common: +0.05Mpa
