Excellent buoyancy
Floating moving ring to eliminate pump body vibration damage to the seal
Flexible drive pin
Avoid damage to the seal ring due to frequent pump start
Integrated design
Easy and quick installation
Limit performance parameter
Temperature: 30℃-80℃, can reach 160℃ with sudden cold water
Pressure: 0-1.6 MPa (2.5 MPa)
Speed: 20 m/s (5000 RPM)
Shaft Diameter: 28 mm - 220 mm
Solid content: no more than 40% impurity by weight
C550 series seals allow different materials to be used to meet different environmental requirements. In order to ensure that the structure can work reliably, the selection of materials for C86 series has been specified, as shown in the following table
Selected Material List
| Item | Material | Standard | Optional Material |
| End face | SISIC silicon carbide reaction-sintered | ● | |
| Sintered pressureless bonded sic | ● | |
| tungsten carbide | | ○ |
| Spring | nickel chromium steel | | ○ |
| Hast-C | ● | |
| Secondary sealing element | Nitrile rubber | ● | |
| EPR | ● | |
| FKM | ● | |
| PTFE | | ○ |
| FFKM | | ○ |
| Other | chrome-nickel steel | | ○ |
| chromium nickel molybdenum steel | ● | |
| Duplex Stainless Steel | ● | |
| Hadtelloy Alloy | | ○ |
1. ● For priority selection
2.○ To allow use, it is determined according to the selection requirements
3. You can provide the materials not provided in the table to meet the more special requirements, if necessary, please contact your company
Installation Drawing:
