Welcome Customer !

Membership

LiDLi Intelligent Technology (Jiangsu) Co., Ltd
Free Member ·1YRS
,
Other

Main Products: 灌装机

Xwboo>Products
Product Categories

LiDLi Intelligent Technology (Jiangsu) Co., LtdFree·1YRS

  • E-mail

    admin@lidlipacking.com

  • Phone

  • Address

    No. 111, Nanyuan Road, Yangshe Town Zhangjiagang City, Suzhou City, Jiangsu Province China

Contact Now

Automatic 3-5 Gallon Drinking Water Bottling Filling Machine

Model
Nature of the Manufacturer
Other
Product Category
Place of Origin
City, Province
Overview
QGF series 5-gallon water filling machine is advanced equipment developed on the basis of international advanced technology and according to the trends of high speed and automation development for a beverage in China.
Product Details

Product Description

Main features:

1)This equipment has a new structure, advanced technology, reliable function, scientific technics flow, good sanitation, and high automation. The operation is simple. It is the ideal filling equipment for all water bottles.
2)Adopt multi-bottle up and down mechanism to make 6 bottles up and down at the same time to improve production efficiency.
3)Material choice is reasonable. Most parts adopt imported high-quality stainless steel. Other parts adopt non-toxic and durable material.
4)Most mechanisms can be installed and repaired with general tools, convenient for the maintenance man to replace and repair.
5)It has perfect safety protection precautions. While pressing down the emergency stop switch, the machine can’t be started, and maintenance and raw material dosing can be done at this moment.
6)Bottle up and down equip position inspection to protect the machine effectively.
7)Cap sorter equips cap shortage detection to control the start and stop of the cap unscrambler.
8)Bottle up and down mechanism connection with rinser conveyor is done at the level position to avoid the influence by the declined bottle.
9)The adjustment of the main drive gear and chain can be done by disassembling the cover when the machine stops. Install the cover when the adjustment is finished.
10)Pneumatic line system equips pressure deducing valve to adapt to all feed air pressure.
11)Bottle conveyor adopts stainless steel flat-top chain to avoid bottle overturn.
12)It adopts stainless steel electric control cabinet. The whole working process as bottle up, bottle rinsing, bottle down, and filling are controlled by PLC.
13)Main electric components (frequency converter, PLC, photoelectric switches, relay) adopt MITSUBISHI, OMRON, etc.
14)Pneumatic line system adopts product of AirTAC, etc.

De-capping

This de-capping machine is designed for 3 & 5 gallon bottle in water production line. It’s used to pull out the cap of recycling bottle before rinsing.

Outside Washing

Brushes are motorised and clean the bottle externally. Since they make the bottle spin, the water jet hits not only the bottom but also the sides of the bottle. It’s used forall-round cleaning the bottle, significantly improves cleaning efficiency.

Rinsing Part

Using imported special efficient spray nozzle, the washing water will be sprayed in a particular angle, can wash any part of the inner wall, rinse with water thoroughly and save flush bottle.
Bottle clamp and lifting mechanism of sliding sleeve adopts Germany Igus corrosion resistant bearing without maintenance.

Filling Part

Uploading and dropping barrels changed from 45 degree to translatory which is more stable. Nozzle can insert into 10-15cm of the barrel in order to rinse little impurities down. Rinsing pump is separately controlled by different magnetic valves. Pump only work when there is barrel on that. It can avoid the mixture of different cleaning fluid.

Capping Part

The PRESS-ON CAPPER is a linear machine used for caps applied on the bottle by pressure. It includes: Cap hopper, Canal chute, Placing system of cap on the neck, Device to snap the cap on the neck. Specific systems to sterilize the caps in order to avoid the contact of contaminating agents present on the cap with the bottle neck. The bottle takes the cap directly from the canal chute. The snapping of the cap on the bottle neck is carried out through the pressure developed by a belt conveyor, provided with a system to adjust the force in order not to stress the bottle.

ModelQGF-200QGF-300QGF-450QGF-600QGF-900
Washing station1 row2 rows3 rows4 rows6 rows
Filling nozzles12346
Bottle type5 gallon Diameter: 270mm; Height: 490mm
Production capacity100-200BPH250-300BPH400-450BPH550-600BPH850-900BPH
Gas consumption0.37m3/min0.6m3/min0.6m3/min1.2m3/min2.2m3/min
Pressure0.4-0.6Mpa0.6Mpa
Power1.75kw3.22kw4.8kw1.2kw2.2kw
Voltage380V 3phase 50HZ / CUSTOMIZE
Machine size (mm)3190*650*15503100*900*16503550*1100*18003800*1100*18003800*2200*1800
Weight800kg1350kg1860kg2300kg3300kg