Welcome Customer !

Membership

LiDLi Intelligent Technology (Jiangsu) Co., Ltd
Free Member ·1YRS
,
Other

Main Products: 灌装机

Xwboo>Products
Product Categories

LiDLi Intelligent Technology (Jiangsu) Co., LtdFree·1YRS

  • E-mail

    admin@lidlipacking.com

  • Phone

  • Address

    No. 111, Nanyuan Road, Yangshe Town Zhangjiagang City, Suzhou City, Jiangsu Province China

Contact Now

5 Gallon Bottle Blow Molding Machine

Model
Nature of the Manufacturer
Other
Product Category
Place of Origin
City, Province
Overview
This equipment can produce different types of food, cooking oil bottles, carbonated drinks, mineral water bottles, juice bottles, wine bottles, tennis balls can, cosmetic bottles, etc.
Product Details

Product Description

TECHNICAL DATA
1. Four Servo Motor Drive makes the machine drive system fully electrical.
a.Servo drives Preform Feeding System;
b.Servo drives Preform Transfer System;
c.Servo drives Mold Clamping System;
d.Servo drives Stretch System.
2. Schneider Motion Control System
Mitsubishi PLC Servo System as the brain of the machine. PTO System (Pulse/Train/Output Servo Positioning Module) works on high-speed positioning, with higher speed, higher noise immunity, and precise positioning.
3. Mold Fixed by Drawer Design
Push the mold, fix the positioning screws. Mold changeover work can be easily done in a half-hour.
4. High efficient Infrared Lamp, Oven Constant Temperature Design.
a. The most advanced high-frequency Infrared Lamp, increases heating efficiency by 30%-50%.
b. Each layer of the lamp is separately controlled, with an assistant ruler on a machine.
c. Intelligent temperature control system.
Temperature detector feedback to PLC automatically, PLC makes an accurate judgment and then controls circulation air in the oven. It leads to constant temperature in Oven, free from voltage fluctuations and ambient temperature. It works when large ambient temperature difference (-28~45 ºC).
d. Preform self-rotation System, ensure every side of every preform is heated evenly, which ensures the quality of the blown bottle.
e. Neck Cooling in Oven.
Preform Necks are cooled by recycling water, which avoids neck deformation.

Container specMax volume20L
Max diameter∅280mm
Neck size≤∅70mm
Max bottle height420mm
Max perform height280mm
Theoretical output (BPH)300-400 BPH (300g)
Molding specClamping stroke320mm
Width of mold680mm
Bottom stroke50mm
Thickness of mold400mm
Number of cavities1
otherCavity pitch78mm
Power consumption30 KW
Operation pressure0.8-1.0 Mpa
Blowing pressure2.8-3.5Mpa
Lamp layer12 layers
Heating holder number76 pcs
Heating area5
Rated power80KW
High-pressure air consumption5.2 m³/min
Main machine weight4.8T
Main machine size3500X2100X2300(main machine)
4900X4000X2900(footprint)