The cnc plate raw materail flame and plasma cutting shearing machine: Ø The Longitudinal Transmission: bilateral driving to make sure stable runningØ The Bilateral rack and pinion transmission without engagement gap, make the machine running smoothly when the ground base deformedØ Lifting Body: this configuration with low failure rate,easy to detect. Can realize the user’s own adjustment if the body tilt after the long time use.
1. 3012 Gantry Plasma&Flame CNC Cutting Machine
u 2 Pcs torches( 1 plasma(Powermax 105A) +1 flame torch),
2 pcs lifting up and down device in horizontal direction(X axis).
u Shanghai F2300B CNC control system
u StartCAM/FastCAM professional version nesting software
u 1 Pcs HYD THC(Torch Height Controller) +1 Oxyfuel THC(CHC-200F)
u 1 Pcs Anti-collision device
u Plasma Power- Powermax 105A of Hypertherm
u Servo motor(Japan Panasonic Original), 2 pcs of 750w in longitudinal; 1 pc of 400w in horizontal.
u Reducer-- 3 Pcs is equipped Japan Panasonic servo motors
u Automatic Ignition Mode x 1 Pcs
u Wood Packaging with load in standard container 1x20ft(LCL)
u Gift free consumable(2/3 sets) of nozzles with electrodes

Model | 3012 Gantry CNC Flame&Plasma Cutting Machine |
Machine Size | (W)3000mmx(L)12000mm | Need to Customize Machine for your application |
Effective Cutting Range | (W)2150mmx(L)10000mm |
Cutting method | Plasma(Powermax105A) Flame |
Cutting torch | Plasma 1 torch (Powermax105A) Flame 1 torch |
Cutting torch lifting distance | 200mm |
Cutting Thickness | Plasma: Quality cutting 1--20mm thickness with pierce cutting thickness 22mm thickness, with Maximum thickness 32mm. Flame :6-200mm |
Cutting Speed | Plasma 500-3500mm/min Flame 100-1200mm/min |
Arc voltage increase | HYD THC |
Plasma torch anti-collision system | Yes (One) |
Control System | Shanghai F2300B Control system with support 11 kinds of languages, such as Russia, Chinese,English, etc |
Drive Mode | Servo motor( Japan Panasonic)--3pcs (Origin) X axis: 400W-1pcs; Y axis :750-2 pcs |
Nesting Software | StarCAM/FastCAM nesting software |
Longitudinal mechanical transmission | 1 set of precision gear rack |
Horizontal pipeline transmission | Fully sealed engineering towline |
Longitudinal pipeline transmission | Hanger |
Rail length | 12m(total 24m) 2m/section |
Heavy rail | 30kg/m |
Cutting table | 10m enough for 12m Machine Rails |
Accurate Cutting Precision | +/- 0.2mm/m |
Machine Moving Speed | 9000mm/min |
Positioning speed | 24000mm |
Setting up Speed error | ≤±5% |
Automatic adjustment of high precision | ≤±1.0mm |
Longitudinal straight line accuracy | ±0.3mm |
The main technical indicators of the machine
Overall accuracy of the whole machine (based on the right comprehensive graphic) Side length (four sides) 1000╳1000, Scribing speed 500-800mm / min |
|
|
Side length (four sides) | Mm | ±0.5mm |
Diagonal Error | AD-BC | | Mm | ±0.5mm |
Origin Deviation | Mm | ±0.2mm |
Intersection deviation | Mm | ±0.5mm |
Straight line deviation | Mm | ±0.2mm |
Cutting surface quality (roughness) (select δ = 25 sheet) |
| Rz (um) = 70 + 1.2a roughness 12.5 |
Verticality and tilt tolerance |
| μ (mm) = 0.4 + 0.015a Tool: Angle ruler |
Straight angle | Mm | Diagonal error ≦ ± 0.2 mm |
Walking straightness | Mm/Effective cutting length | Longitudinal ≦ ± 0.2mm / effective length Horizontal ≦ ± 0.2mm / effective length |
Torch angle error | Degree | ≦ ± 0.5º |
Equipment noise | Decibel | ≤80dB |
Machine working conditions
Power Power voltage / frequency | 3×380v±10%/50Hz Single Phase 220v±10%/50Hz |
Input Power of machine | 3KW |
Compressed air | Dry, oil-free; Pressure: 0.8Mpa Flow: 1.0m3/H |
Gas type | Propane/Acetylene/Propene/Natural Gas. |
Ambient temperature | 0-50 ℃ |
Relative humidity | <90% Non-Condensing |
Surroundings | Ventilation. No big impact within 5 meters |
Earthquake level | According to six levels of defense |
Ø Machine frame is 8mm thick steel plate welded thicker than the other manufacturers, to improve the structural strength and enhance life. make sure the working stable and cutting precision