Welcome Customer !

Membership

SHANDONG YUDONG SUNSHINE MACHINE CO.,LTD.
Free Member ·1YRS
,
Other

Main Products: 数控冲床

Xwboo>Products

SHANDONG YUDONG SUNSHINE MACHINE CO.,LTD.Free·1YRS

  • E-mail

    bruce@yudongsunshine.com

  • Phone

    0086-531-87980587

  • Address

    Jingshi West Road, Huaiyin District, Jinan City, Shandong Province.

Contact Now

Punching Stainless Steel Plate

Model
Nature of the Manufacturer
Other
Product Category
CNC Machine For Steel Tower
Place of Origin
City, Province
Overview
The hydraulic pressure system is mainly composed of oil tank, punching marking regulator, pressure system block and drill system block. Each part is connected with steel pipe or hose, and oil tanks are driven under the control of electrical CNC system to realize calibration, clamping, pressing, punching, drilling and marking etc.High pressure pump and low pressure pump is installed on the oil tank to provide hydraulic power to the whole system.
Product Details

The power supply of this CNC punching machine for joint plates is AC380V, 35KVA, and distributed to a drive supply of AC415V, AC200V and a control supply of AC220V by master switch QF1, servo transformer, and control transformer. The drive supply of AC415V is for the motor of oil pump; the drive supply of AC200V is for servo motor; the control supply of AC220V is for CNC, DC24V regulated power supply, AC contactor, and magnet valves. The DC24V supply is for servo drive, CNC system, PLC and proximity switch.


扳机1.jpg


1. Brief Introduction:

The YBJ200 CNC Hydraulic Connecting Plate Punching Machine is often used in the production of Iron/Steel Towers in the Power transmission and transformation industry and the production of metal structural parts in the construction and bridge industries. It is mainly used for punching, drilling and typing of connecting plates.

2. Machine Model and Configuration

1、Mechanical Part

No.

Item

YBJ200

1

Machine Layout Area

5*3.5 M

2

No. of Hosts

1 Set

3

No. of Workbench Bases

1 Set

4

No. of Y-Slide

1 Set

5

No. of X-direction Slide

1 Set

6

No. of Clamps

2 Sets

8

Pneumatic control system

1 Set

9

Hydraulic control system

1 Set

10

Buyer Preparation Working

Installation Site-cement foundation, embedded slabs and anchor bolts required by equipment, make the foundation according to the foundation plan provided by the supplier

2、Electronic Control Part

1

CNC Controller system

PLC control system

2

Drive System

Panasonic Servo Motor

3. The main technical parameters of the machine

No.

Item

YBJ200

1

Processing plate size

2000*500mm

2

Processing plate thickness

5-25mm

3

Punching force

1000KN

4

Maximum punching diameter

Φ26mm

5

Total number of modules

3 Pcs

6

Number of punching die

2 Pcs

7

Number of CNC axes

2

8

X, Y axis servo motor power

2*2KW

9

X, Y axis feeding speed

20m/min

10

Punching speed

50-55 Times/Min

11

Total weight of equipment

6T

4. Machine working environment

1

Power supply

3 Phase 4-Wire System

2

Voltage

3 Phase 415V±10%

3

Frequency

50Hz

4

Operating Temperature

0℃-40℃

5

Relative Humidity

<90% no condensation

6

Compressed Air

Pressure: 0.8MPa Flow rate: 0.1m³/min

5. Machine parts introduction

The equipment is mainly composed of Punching Host Unit, Workbench Moving Unit, Clamp Assembly, Pneumatic System, Electrical System, Hydraulic System, etc.