Welcome Customer !

Membership

SHANDONG YUDONG SUNSHINE MACHINE CO.,LTD.
Free Member ·1YRS
,
Other

Main Products: 数控冲床

Xwboo>Products

SHANDONG YUDONG SUNSHINE MACHINE CO.,LTD.Free·1YRS

  • E-mail

    bruce@yudongsunshine.com

  • Phone

    0086-531-87980587

  • Address

    Jingshi West Road, Huaiyin District, Jinan City, Shandong Province.

Contact Now

Steel Plate Punching Shear

Model
Nature of the Manufacturer
Other
Product Category
CNC Machine For Steel Tower
Place of Origin
City, Province
Overview
The distance from the upper point of the drilling spindle (without a drill in the spindle) up to the table surface is 180mm, we designed this distance can satisfy the Max. drill dimater 50mm. And the drill spindle adopts hydraulic feeding, can control the stroke itself, when the drill head touch the workpieces, it will turn to feeding (you just need to adjust the feeding speed), don't need measure the length of drill manually.
Product Details

There are one service position of marking and two positions of punching on the machine. While in marking, put the required characters into the character box and fill the vacancy with blank characters, then screw the bolts to tight, insert the character box to the fixed groove at the top of the piston rod. The punching mould shall be selected in accordance with the aperture and plate thickness. The punch is fixed on the rod to tighten the screw, and put the hollowing block into the base of cavity die.

e9c38c750da70903ff2b9ee4b6c29cb.jpg

1. Brief Introduction:

The YBJ200 CNC Hydraulic Connecting Plate Punching Machine is often used in the production of Iron/Steel Towers in the Power transmission and transformation industry and the production of metal structural parts in the construction and bridge industries. It is mainly used for punching, drilling and typing of connecting plates.

2. Machine Model and Configuration

1、Mechanical Part

No.

Item

YBJ200

1

Machine Layout Area

5*3.5 M

2

No. of Hosts

1 Set

3

No. of Workbench Bases

1 Set

4

No. of Y-Slide

1 Set

5

No. of X-direction Slide

1 Set

6

No. of Clamps

2 Sets

8

Pneumatic control system

1 Set

9

Hydraulic control system

1 Set

10

Buyer Preparation Working

Installation Site-cement foundation, embedded slabs and anchor bolts required by equipment, make the foundation according to the foundation plan provided by the supplier

2、Electronic Control Part

1

CNC Controller system

PLC control system

2

Drive System

Panasonic Servo Motor

3. The main technical parameters of the machine

No.

Item

YBJ200

1

Processing plate size

2000*500mm

2

Processing plate thickness

5-25mm

3

Punching force

1000KN

4

Maximum punching diameter

Φ26mm

5

Total number of modules

3 Pcs

6

Number of punching die

2 Pcs

7

Number of CNC axes

2

8

X, Y axis servo motor power

2*2KW

9

X, Y axis feeding speed

20m/min

10

Punching speed

50-55 Times/Min

11

Total weight of equipment

6T

4. Machine working environment

1

Power supply

3 Phase 4-Wire System

2

Voltage

3 Phase 415V±10%

3

Frequency

50Hz

4

Operating Temperature

0℃-40℃

5

Relative Humidity

<90% no condensation

6

Compressed Air

Pressure: 0.8MPa Flow rate: 0.1m³/min

5. Machine parts introduction

The equipment is mainly composed of Punching Host Unit, Workbench Moving Unit, Clamp Assembly, Pneumatic System, Electrical System, Hydraulic System, etc.