Welcome Customer !

Membership

SHANDONG YUDONG SUNSHINE MACHINE CO.,LTD.
Free Member ·1YRS
,
Other

Main Products: 数控冲床

Xwboo>Products

SHANDONG YUDONG SUNSHINE MACHINE CO.,LTD.Free·1YRS

  • E-mail

    bruce@yudongsunshine.com

  • Phone

    0086-531-87980587

  • Address

    Jingshi West Road, Huaiyin District, Jinan City, Shandong Province.

Contact Now

Plate Marking and Punching Machine

Model
Nature of the Manufacturer
Other
Product Category
CNC Machine For Steel Tower
Place of Origin
City, Province
Overview
There are two hydraulic clamps on the sliding plate, their location can be moved alongside the Axis X so as to adjust different work piece. While in adjustment, loose the screw and press plate, move the clamp by hand to the adequate place, fasten the screw and press plate again. In the vertical direction, the clamp is in the condition of floating. To the joint plate with slight unevenness, they may be arched during punching, and then the clamp will be moved accordingly to avoid the breakage of clamp. A original loc......
Product Details

This drilling unit enjoys compact design, powerful engine and high efficiency.

With the automatic signal transmission device which can send signals automatically when the drill touches the work piece and finishes punching, the drilling machine possesses the empty run fast forward function and instant transfer to processing function when touches with work piece. After finishes drilling, it can be returned with high speed. In other word, during the drilling work, this drill machine does not need to make any adjustment according to the variation of the lengthen of drill bit or the thickness of the plate, as a result, this drill machine can largely diminish the non-operation time to improve the efficiency.

The drilling and drawing force of the main bearing is provided by the gear driven while the feeding power is driven by the hydraulic cylinder.

fb7b75ea639621a2b7257f9b7332121.jpg

1. Brief Introduction:

The YJX CNC Hydraulic Connecting Plate Punching Machine is often used in the production of Iron/Steel Towers in the Power transmission and transformation industry and the production of metal structural parts in the construction and bridge industries. It is mainly used for punching, drilling and typing of connecting plates.

2. Machine Model and Configuration

1、Mechanical Part

No.

Item

YBJ120

1

Machine Layout Area

5*3.5 M

2

No. of Hosts

1 Set

3

No. of Workbench Bases

1 Set

4

No. of Y-Slide

1 Set

5

No. of X-direction Slide

1 Set

6

No. of Clamps

2 Sets

8

Pneumatic control system

1 Set

9

Hydraulic control system

1 Set

10

Buyer Preparation Working

Installation Site-cement foundation, embedded slabs and anchor bolts required by equipment, make the foundation according to the foundation plan provided by the supplier

2、Electronic Control Part

1

CNC Controller system

PLC control system

2

Drive System

Panasonic Servo Motor

3. The main technical parameters of the machine

No.

Item

YBJ120

1

Processing plate size

1500*800mm

2

Processing plate thickness

5-27mm

3

Punching force

1200KN

4

Maximum punching diameter

Φ33mm

5

Total number of modules

3 Pcs

6

Number of punching die

2 Pcs

7

Number of print header groups

1 Group

8

Prefix

10 Pcs

9

Header size

(L*W*H)14*10*19mm

10

Number of CNC axes

2

11

X, Y axis servo motor power

2*2KW

12

X, Y axis feeding speed

20m/min

13

Punching speed

50-55 Times/Min

14

Total weight of equipment

6T

4. Machine working environment

1

Power supply

3 Phase 4-Wire System

2

Voltage

3 Phase 415V±10%

3

Frequency

50Hz

4

Operating Temperature

0℃-40℃

5

Relative Humidity

<90% no condensation

6

Compressed Air

Pressure: 0.8MPa Flow rate: 0.1m³/min

5. Machine parts introduction

The equipment is mainly composed of Punching Host Unit, Workbench Moving Unit, Clamp Assembly, Pneumatic System, Electrical System, Hydraulic System, etc.