Welcome Customer !

Membership

SHANDONG YUDONG SUNSHINE MACHINE CO.,LTD.
Free Member ·1YRS
,
Other

Main Products: 数控冲床

Xwboo>Products

SHANDONG YUDONG SUNSHINE MACHINE CO.,LTD.Free·1YRS

  • E-mail

    bruce@yudongsunshine.com

  • Phone

    0086-531-87980587

  • Address

    Jingshi West Road, Huaiyin District, Jinan City, Shandong Province.

Contact Now

Punching the Metal

Model
Nature of the Manufacturer
Other
Product Category
CNC Machine For Steel Tower
Place of Origin
City, Province
Overview
The main machine is a special hydraulic press which is equipped with pressure apparatus and drill drift holding device. There are three drill drifts on the holding device. They are used to install punch and marking apparatus.The body of the machine uses Type C double-plate jointing structure with the advantage of rigid and high power of anti-eccentric load. The main cylinder is fixed on the body by four high strength bolts which is easy to install and convenient for maintenance.
Product Details

CNC feeding worktable can be divided into fixed part and movable part. The fixed part is set on the ground which is linked with main unit. To the fixed part, alongside the front-back direction of main unit is called Axis Y, and then the fixed part is called Axis Y rack. The movable part is installed on the Axis Y rack through the guide bush which is rolling in straight line, under the driven by the servo motor and ball screw shaft, the movable part is running though the Axis Y to realize precise positioning. To the movable part, alongside the left-right direction of main engine is called Axis X, and then the movable part is called Axis X rack. Axis X rack is closed to the head of the main engine, on both sides which is installed a supporting plate with universal transmission ball to support the work piece. At the back of the Axis X rack, two rolling guide bushes are installed with a sliding plate on the direction of Axis X. Under the driven by the servo motor and ball screw shaft, the sliding plate can running though the Axis X to realize precise positioning.

7893e88be8c554eaba059f56bd9785d.jpg

1. Brief Introduction:

The YJX CNC Hydraulic Connecting Plate Punching Machine is often used in the production of Iron/Steel Towers in the Power transmission and transformation industry and the production of metal structural parts in the construction and bridge industries. It is mainly used for punching, drilling and typing of connecting plates.

2. Machine Model and Configuration

1、Mechanical Part

No.

Item

YBJ120

1

Machine Layout Area

5*3.5 M

2

No. of Hosts

1 Set

3

No. of Workbench Bases

1 Set

4

No. of Y-Slide

1 Set

5

No. of X-direction Slide

1 Set

6

No. of Clamps

2 Sets

8

Pneumatic control system

1 Set

9

Hydraulic control system

1 Set

10

Buyer Preparation Working

Installation Site-cement foundation, embedded slabs and anchor bolts required by equipment, make the foundation according to the foundation plan provided by the supplier

2、Electronic Control Part

1

CNC Controller system

PLC control system

2

Drive System

Panasonic Servo Motor

3. The main technical parameters of the machine

No.

Item

YBJ120

1

Processing plate size

1500*800mm

2

Processing plate thickness

5-27mm

3

Punching force

1200KN

4

Maximum punching diameter

Φ33mm

5

Total number of modules

3 Pcs

6

Number of punching die

2 Pcs

7

Number of print header groups

1 Group

8

Prefix

10 Pcs

9

Header size

(L*W*H)14*10*19mm

10

Number of CNC axes

2

11

X, Y axis servo motor power

2*2KW

12

X, Y axis feeding speed

20m/min

13

Punching speed

50-55 Times/Min

14

Total weight of equipment

6T

4. Machine working environment

1

Power supply

3 Phase 4-Wire System

2

Voltage

3 Phase 415V±10%

3

Frequency

50Hz

4

Operating Temperature

0℃-40℃

5

Relative Humidity

<90% no condensation

6

Compressed Air

Pressure: 0.8MPa Flow rate: 0.1m³/min

70250a944a6dd01bcffac902c66052e.jpg

5. Machine parts introduction

The equipment is mainly composed of Punching Host Unit, Workbench Moving Unit, Clamp Assembly, Pneumatic System, Electrical System, Hydraulic System, etc.