Tower shaped air purifier.Popular in US.3 Wind speed settings. CADR 160.Easy operate,turn dial button control.3 front panels ,black and white for option.
Product Details
Product Description
This air purifier adopts the unique wind wheel mirror fan design of double-wheel mirror wind, which fully optimizes the air duct curve, makes the air flow at the air outlet run more smoothly, and increases the airflow circulation. Built-in primary filter cotton and HEPA filter, higher purification efficiency.
Product Parameter
Power cord length
1.8m
Air outlet location
behind the machine
Air inlet location
in front of the machine
Control Type
Knob Control
Motor Specifications
Four for Siway Motors
Sensor
none
Input power
45W
Noise
≤58dB (A)
Particulate CADR
160m³/h
Composite Filter
Pre-Filter: Capture the initial dust and allergen particles .It is helpful to control and prevent the growth of bacteria and mould.
Charcoal Filter: It can reduce odor and smells effectively
HEPA Filter: It can effectively filter pollutants such as smoke, dust and bacteria
Product Feature
Sleep mode
After entering the sleep mode, the light goes out and enters the low-speed operation state.
Wind speed
Wind speed regulation has 3 levels of wind speed, and the wind can be adjusted at will to follow the heart.
Timing mode
Timing mode: 1-7 hours of free timing, everything is in.
Child lock
Press and hold the child lock switch for 3 seconds to activate or deactivate the child lock.
Suitable for small space, applicable area of 10.4-17.9 square meters, bedroom, children's room, study, pet house, etc.
FILTER REPLACEMENT
1. Power off and pull the plug.The device still under stand by mode when power off, please pull the plug.
2. Remove the front panel Notice The device still under stand by mode when power off, please pull the plug. Hold on the buckles both of the left and right sides, then remove it
3. Please take out the front panel and composite filter,and pack the used filter into bag to avoid any second pollution.
4. Please remove poly-bag first adjust the direction of filter(strip on the outside), put into the main body and closed the front panel according, then can use as before.