Welcome Customer !

Membership

Guangzhou Haike Electronics Technology Co,.Ltd
Free Member ·1YRS
,
Other

Main Products: 空气净化器

Xwboo>Products
Product Categories

Guangzhou Haike Electronics Technology Co,.LtdFree·1YRS

  • E-mail

    fanpuluo@gzhaike.com

  • Phone

    +86-20-84501059

  • Address

    No. 613 Tainan Rd, Dongchong Town, Nansha District, Guangzhou, PR. China.

Contact Now

Malaysia Air Purifier

Model
Nature of the Manufacturer
Other
Product Category
Home Air Purifier
Place of Origin
City, Province
Overview
It is the basic entry level model.Good for small room,such as bedroom,office,cover about 20 m2.Effective for dust,smoke,pet dander,smog
Product Details

Why Puritie UV-C Sterilizer is a better choice compared to other UV-C products?

Puritie UV-C Sterilizer is designed to provide direct germicidal ultraviolet irradiation for air and surface disinfection in unoccupied space. It is movable, allowing fast relocation of the unit on site. The UV-C lamps are installed on adjustable arms, enabling flexible positioning of the lamps to target on various surfaces for maximum efficiency.


The Sterilizer is powered by two CE certified Osram Germicidal Ultraviolet lamps that produce ultraviolet energy at the specific wavelength of 253.7nm. This wavelength irradiation is highly effective against microbes including virus, bacteria and mold spores. The intensity of this UV radiation by one lamp measured on surface at 50 centimetres distance is above 110 uW/cm2, which is sufficient to destroy viruses on surface in minutes.


Puritie UV-C Sterilizer is also integrated with Intruder Motion Sensor and Digital Timer to protect users from exposure to UV-C rays.


How to set up the Sterilizer safely for best disinfection result?

No special preparation in the area is required prior to disinfection, but please make sure the targeted surfaces will be directly exposed to the UV rays. The sterilizer does not generate any harmful byproducts, nor does it leave any residual substances in the area of disinfection.


For best disinfection result, the sterilizer should be positioned as close to the center as possible, away from corners of the area. Please check if the Intruder Motion Sensor of the device faces the entrance of the disinfection area and is within 2 meters from the entrance to the area. This is to ensure the sensor will shut off the device when people accidentally enters the area.


Open protection door of the device, lift the arm and adjust its angle to position the lamps according to disinfection needs (i.e. air and surface disinfection or targeted surface disinfection), then set the appropriate time for the size of the area for disinfection (please refer to Manual for Recommended Disinfection Time for Target Surface and Recommended Air Disinfection Time by Area)


Do I need to wear protective equipment when operating Puritie UV-C Sterilizer?

After setup of the device, the operator should leave the area immdediately to avoid exposure to UV-C irradiation. However, the best practice is to always wear protective eyewear, face shield, gloves and clothing that covers exposed skin when handling the product.


Can I use Puritie UV-C Sterilizer as a replacement for cleaning and disinfection?

Puritie UV-C sterilizer is designed to disinfect air and surface by effectively destroying / inactivating up to 99.9% of micro-organisms. However, it should be used in conjunction with other disinfection protocols for highest possible level of infection prevention and control.


Is maintenance required for Puritie UV-C Sterilizer?

Yes. Please clean the germicidal lamps regularly. It is recommended to clean the germicidal lamps at least once every three months. To clean the lamp, moisten a lint-free cloth with denatured alcohol then gently wipe down the lamp surface. The lamp has a manufacturer rated average effective life of 9,000 hours. At 9000 hours of use, the lamp's radiant illumination will start to decay. For maximum efficiency, it is recommended to replace the lamps after 9,000 hours of operation.


What should I do if a lamp tube breaks?

Germicidal ultraviolet lamps like standard fluorescent lamps, contain small amount of mercury, which is toxic. If a lamp breaks, switch off the device, open windows and doors to ventilate the area. Wear protective gloves when handling broken ultraviolet lamps. Do not use a household vacuum cleaner to pick up fragments of the broken lamp. Sweep up debris into plastic bag and dispose of in accordance with local regulations. Dispose of cleaning supplies, broken lamp tubes at your local household hazardous waste facility.


Does UV-C cause damage to certain type of materials in the disinfection area?

UV degradation is a common problem in products exposed to sunlight. All types of UV can cause a photochemical effect within the polymer structure, which may lead to degradation of some sort to the material.


The higher energy UV-C is most likely to affect plastics. Absorbed UV energy can excite the photos in a plastic. Exciting the photons can create free radicals. While many pure plastics cannot absorb UV radiation, the presence of catalyst residues and other impurities (examples: oxygen, sodium) even at trace amounts, will often act as free radical receptors. Those free radicals can cause breaks in the polymer bonds.


The UV induced damages tend to remain superficial and do not generally affect the structural or mechanical integrity of thick plastic components. It is recommended to remove objects made of sensitive materials from the area prior to UV-C disinfection. For critical objects that cannot be removed, it is recommended to cover with tape or other material