Welcome Customer !

Membership

Dongguan Astrand Electronic Technology Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 试验仪器

Xwboo>Products

Dongguan Astrand Electronic Technology Co., Ltd.Free·1YRS

  • E-mail

    sarah@astrand-martindale.com

  • Phone

  • Address

    No. 94, Chenwu Section, Guantai Road, Houjie Town, Dongguan City

Contact Now

XD-B13 Fabric Textile Ici Mace Snagging Resistance Tester

Model
Nature of the Manufacturer
Other
Product Category
Fabric Textile Testing Equipment
Place of Origin
City, Province
Overview
XD-B13 Fabric Textile Ici Mace Snagging Resistance Tester
Product Details

Product Introduction:

This tester is suitable for testing outerwear knitted and woven fabrics and other fabrics that are easy to snag, especially for the snagging properties of chemical fiber filaments and textured yarn fabrics. Put a chain-suspended hammer around the guide rod and put it on the surface of the sample sleeved on the drum. After the drum rotates at a constant speed for a certain number of times, remove the sample and compare it with the rating chart in the rating box.


Product Discription:

The machine can quickly detect how easy or difficult the fabric is to get hooked (that is, hook the yarn out of the fabric) under normal wearing conditions. The instrument is equipped with an observation box and a comparison pattern card for different fabric structures. Equipped with 4 test rollers (covered with the fabric to be tested), the hammer ball is a tungsten carbide head and is controlled by a predetermined electronic counter.

Standard accessories: 2/4 rubber rings, 2/4 wool felt cylinders, 1 sampling plate, spacing ruler 45mm


Standard: 

ASTM D3939, JIS L1058, GB 11047

Accessories: Tungsten carbide crochet needles (12 pcs/pack); Felt sleeves (4 pcs/pack); refer to the hooking chart


Technical parameter:

Working positiontwo groups / four groups optional
Test speed60±2 r/min
Testing Cylinderouter diameter 82mm, length 210mm
Total Weight of Mace BallWeight 160±10g/pc
Nailsexposed length 10mm, 11 nails / hammer
Needle exposure lengthdiameter 10mm, spacing 12mm
Distance between hammer   and guiding rod(connecting chain length)45mm
Test times600 times
Specimen size200x330mm,two pieces each in the warp and weft directions
Size(WxDxH)94.5x45x38cm
WeightAbout 70kg
Power supply1∮,AC220V,3A