Welcome Customer !

Membership

Dongguan Astrand Electronic Technology Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 试验仪器

Xwboo>Products

Dongguan Astrand Electronic Technology Co., Ltd.Free·1YRS

  • E-mail

    sarah@astrand-martindale.com

  • Phone

  • Address

    No. 94, Chenwu Section, Guantai Road, Houjie Town, Dongguan City

Contact Now

XD-B18 Martindale Abrasion Testing Machine Fabric Martindale Abrasion Pilling Tester

Model
Nature of the Manufacturer
Other
Product Category
Fabric Textile Testing Equipment
Place of Origin
City, Province
Overview
XD-B18 Martindale Abrasion Testing Machine Fabric Martindale Abrasion Pilling Tester
Product Details

Product description:

The Martindale Abrasion and Pilling Tester can test the abrasion resistance and pilling performance of various structural fabrics. The sample is subjected to low-pressure continuous reversing friction with a certain friction material, and its wear and pilling degree can be compared with the standard parameters for evaluation. The instrument adopts a movable sample fastening component, which can take out a friction sample at any time without affecting other samples. It is a fastening method approved by BSEN ISO12947-1:1999.


Application:

This machine is suitable for detecting woven fabrics, knitted fabrics, piled fabrics with a pile height of less than 2mm, non-woven fabrics, and coated fabrics (that is, woven fabrics and knitted fabrics are used as the base fabric, and the coating part forms a continuous pattern on the surface of the fabric. of film), abrasion resistance of leather, etc. (sample breakage, mass loss, appearance change), pilling performance.


Working principle:

Under the specified pressure, the circular sample is rubbed with the same fabric or wool fabric abrasive fabric in the trajectory of Lissajous figure for a certain number of times, and then the abrasion resistance and pilling performance of the sample are checked.


appendix:

XD-F33: SDC wool cloth friction fabric, selected friction fabric SM25, width 1.6 meters × length 5 meters.

XD-F26: wool felt (woven fabric), diameter 140mm standard felt lining disc (non-woven) 140mm diameter (20 pieces/pack),

BS5690/1991+PR, EN, ISO 12947-1750±50gm/m²×approximately 2.5mm thick.

XD-F57: SM50 chart, pilling test IWS+ASTM, 4 sets of 1-5 (plain, twill A, twill B, blanket).


Options:

EMPA Chart Standard, Pilling Test (3×4 Knit).

EMPA chart standard, pilling test (3×4 woven).

Standard friction sheet, F2 (230mm×280mm), used for abrasion resistance test of protective gloves (50pcs/pack).

Silicon carbide fabric sheet (P180G), 230×280mm, used for testing the abrasion resistance of coated fabrics (25 sheets/pack).

Wear test

The circular fabric sample is rubbed against the standard rubbing cloth for friction test. The wear resistance depends on the number of rubbing times or the weight consumption of the sample when the sample is decomposed. The swing trajectory on the rubbing cloth of the test sample is called the Lissajous figure.

pilling test

The pilling test method used on the Martin-Dell testing machine was developed in conjunction with the EMPA. The test is suitable for knitted and woven fabrics (woven from staple fiber sand). The degree of pilling was evaluated using the criteria described in language in conjunction with the EMPA picture criteria.

Operation and Amplitude

For some jobs, a regular interactive action test based on Lissajous graphs is required. When changing from the abrasion test to the pilling test, the length of the vibration amplitude needs to be changed. Changing the mode of operation and the amplitude of the vibration is as simple as moving the position of the drive assembly without the need for additional tools and spare parts.


Standards:

ISO 5470, DIN53863/53865, BS 3424/5690, IWTO 40-88, BS EN 388/530, IWSTM 112/196,ASTM 4966/4970, ISO 12673, JIS L1096, SFS 4328, PR EN ISO 12947-1, PR EN ISO 12945-2, SATRA TM31, ISO 20344 S EN ISO 17076, ISO 12947, ISO 12945, GB/T 21196, GB /T 4802, DIN 53863, M&S P19, P19A, P19C, PV 3928


Technical parameter:

Number of working position4 5 9
Test pressure:ACloth sample holder 155g±1g B: Clothing sample weight 260g±1g
Loading hammer mass2385g±10g
Wear resistance stroke60.5±0.5mm
Pilling stroke24±0.5mm
Test speed outer wheel47.5±2.5r/min, inner wheel: 44.5±2.4r/min
Test pressure Abrasion resistance595±7g/795±7g, pilling: 415±2g
Flattening weightweight 2.5±0.5kg, diameter 120±10mm
ControllerPLC touch screen control
Grinding table diameter120mm
Dimensions860×610×380mm
Power supply1∮, AC220V, 5A
Weight80 KG