Overhead All Aluminum Conductor is widely used in power transmission lines, the advantage of bare aluminum cables conductor is low cost,simple structure,large transmission capacity, good conductivity, sufficient mechanical strength and high tensile strength and so on.
Product Details
Application
Overhead All Aluminum Conductor(AAC,AAAC and ACSR) electronic cable have been widely used in power transmission lines with various voltage levels.
1.The hard aluminum conductor used for AAC and ACSR conforms to the standard GB/T 17048-1997 (equivalent to IEC 60889:1987).
2.All Aluminum Conductor cable can be produced according to customers requirements for material standard
Service performance
1.Under installation,the ARC downing stress of all the conductors should be the same.With in the permissible distance of crossing buildings or dropping to the ground,the stress can be 10-15% higher than regular stress.
2.When connecting conductors,the Overhead All Aluminum Conductor electronic cable beside the connecting tube cant be prominent.Otherwise,the force on the operating conductors will be unbalanced.After connectors are install, the connecting tube should be painted by moisture-proof varnish in order to protect it from corrosion.
3.Under the circumstance that rare climate is occuring and ice coverage rate low in heavy ice area,the biggest stress of cable at the lowest point of the sag should not exceed 60% of the short-time destructive power.
Other terms:
Supply Ability: 5000km/Month
Packaging: Wood Drum, Wood-metal Drum or Metal Drum.