Although voltage regulators have become common in the daily life, do you know how to choose the right voltage regulator for your device? What are the characteristics of a good voltage regulator?
How do I choose the right size stabilizerfor my application?
Simple tips for selecting stabilizers
What characteristics should the voltage regulator have?

How do I choose the right size stabilizer for my application?
Choosing the right stabilizer for your application is critical. Key areas to focus on are the nature of the application, the power consumption range, and the level of voltage fluctuations experienced in your area. You need to know the rating of the device to be protected - the rating is usually in KW, KVA, or amperes. You also need to know the nominal line voltage and frequency.
Simple tips for selecting stabilizers
1. Check the voltage, current, and rated power of the equipment. It is written on the specification label near the power outlet, otherwise check the user's manual.
2. To get the maximum power, all equipment to be connected to the stabilizer times "230 x maximum rated current". Add 20-25% safety margin to achieve stabilizer rating. If you plan to add more devices later, you can reserve buffers for them.
3. You should also consider the inrush current that flows when the device is turned on.
4. The most important thing to know is the nature of the load attached to the stabilizer. First, you must write down the power (or watts) of all the devices that will be connected to the stabilizer. The sum of the power consumption (or watts) will give you the load (in watts) on the stabilizer. But most stabilizer sizes are in VA (voltammetry) or kVA (kVA, equal to 1000 voltammetry). While you have to make some measurements to get the actual VA (or voltammetry) from watts (W), to give a rough approximation, you can increase the watt value by 20% to get the approximate VA size you might need.
5. So, for example, if the total watts connected to your stabilizer is 1000, you can use a stabilizer of 1200 VA or 1.2 kVA. (Please note that 20% applies to residential systems and may not work in industry if your power factor is not good).
6. In general, regulators have different operating ranges (operating ranges are the voltage ranges where the regulator operates/stabilizes the input mains voltage and provides the desired output voltage). It is important to choose a stabilizer that is suitable for voltage fluctuations in your area.
7. Be aware of common power fluctuation levels in your area. (Such as very low/high voltage area, medium-high/low voltage area, etc.) You must select a range of stabilizers that meets the needs of your location. For example, if your location experiences very low/high voltage fluctuations, you may need to choose a stabilizer with a wide operating range.
What characteristics should the voltage regulator have?
1. Because the voltage regulator works with electricity, there is always a risk of getting wet or damaged when your voltage regulator is placed on the ground or anywhere unsafe. That's why most stabilizers can be mounted on a wall or placed in a higher position, not only to protect it from any damage, but also to protect your family, especially young children, from the risk of electric shock.
2. Many of the latest models have been digitized to make stabilizer functions more accurate and reliable. What's interesting about these new models is that not only are they digital, but they can also be adapted to a variety of devices. Therefore, all you have to do is move the stabilizer from one device to another to make it work properly. If installed, most of them will also be connected to and fit into generators.
3. Overload protection completely shuts down the regulator output in the event of short circuit or any burnout due to overload.
Always choose stabilizers designed specifically for your home appliances. We hope you make the right decision. If you are looking for a supplier of stabilizer for refrigerator with good quality and reasonable price, Zhejiang TTN Electric Co., Ltd. is a very good choice.