，
MS series aluminum shell 3 phase 1hp motor comply with the relevant regulations of the International Electrotechnical Association IEC. Good raw materials are selected and the overall design is carried out. It has the advantages of good performance, low noise, low vibration, safe and reliable operation, beautiful appearance, small size, light weight, simple structure and convenient maintenance. MS motor can be widely used in general occasions and mechanical equipment with higher requirements that do not contain flammable, explosive or corrosive gases, such as metal cutting machine tools, woodworking machine tools, fans, water pumps, compressors, Machinery transmission equipment for agriculture, food processing, etc.
Product Detail
Motor Type: 3 phase 1hp motor
Output Power: 0.06 kW - 18.5 kW
Ambient temperature: -15℃～40℃
Altitude: not more than 1000m
Rated voltage: 380V, optional voltage value between 220 ~ 760V
Rated frequency: 50Hz, 60Hz
Protection level: IP54, IP55
Insulation class: B/F
Cooling method: IC411
Working method: S1
Connection method: Y connection of 3kW and below, △ connection of 4kW and above
Product Parameter (Specification)
1 hp 3 phase induction motor
Production Features
Know More Us
Why Us
Service and Packing
Motor Knowledge
B35 motor flange cover deviation problem
There is a motor manufacturer that returned the B35 motor mounting holes in batches to the factory. After returning to the factory, the end cover processing process was checked, and all of them met the requirements. The manufacturer believed that the processing was completely in line with the process, but the actual inspection also found that there were holes. biased problem. Ms. Participant was invited to participate in the analysis of this problem, and found that the design of the drill die for the end hole of the motor was unreasonable (positioned by the inner circle of the stop of the machine seat), and the size of the end hole relative to the foot could not be guaranteed; it is recommended to improve the drill die , increase the positioning of the foot surface, and completely solve the problem.
