，
MS series aluminum shell induction motor 1.5 hp comply with the relevant regulations of the International Electrotechnical Association IEC. Good raw materials are selected and the overall design is carried out. It has the advantages of good performance, low noise, low vibration, safe and reliable operation, beautiful appearance, small size, light weight, simple structure and convenient maintenance. MS series motor can be widely used in general occasions and mechanical equipment with higher requirements that do not contain flammable, explosive or corrosive gases, such as metal cutting machine tools, woodworking machine tools, fans, water pumps, compressors, Machinery transmission equipment for agriculture, food processing, etc.
Product Detail
Motor Type: induction motor 1.5 hp
Output Power: 0.06 kW - 18.5 kW
Ambient temperature: -15℃～40℃
Altitude: not more than 1000m
Rated voltage: 380V, optional voltage value between 220 ~ 760V
Rated frequency: 50Hz, 60Hz
Protection level: IP54, IP55
Insulation class: B/F
Cooling method: IC411
Working method: S1
Product Parameter (Specification)
induction motor 1.5 hp
Production Features
Know More Us
Why Us
Service and Packing
Motor knowledge
What are the common faults of single-phase asynchronous motors?
Common faults of single-phase asynchronous motors are mainly manifested in electrical and mechanical aspects. Common failures and their causes are as follows:
1. Single-phase motor cannot start
There are several electrical reasons:
①The power supply voltage does not meet the requirements.
② The contact of the centrifugal switch is damaged and it is in the disconnected state.
③The capacity of the split-phase capacitor is too small, invalid or damaged.
④ The main winding is open, short-circuited or grounded.
⑤ The secondary winding is open, shorted or grounded.
⑥ The rotor is severely broken or the end ring is broken.
⑦The motor is overloaded, and the protection device operates to cut off the power supply.
