，
MS series aluminum shell three-phase induction motor 0.5 hp comply with the relevant regulations of the International Electrotechnical Association IEC. Good raw materials are selected and the overall design is carried out. It has the advantages of good performance, low noise, low vibration, safe and reliable operation, beautiful appearance, small size, light weight, simple structure and convenient maintenance. MS series mini induction motor can be widely used in general occasions and mechanical equipment with higher requirements that do not contain flammable, explosive or corrosive gases, such as metal cutting machine tools, woodworking machine tools, fans, water pumps, compressors, Machinery transmission equipment for agriculture, food processing, etc.
Product Detail
Motor Type: induction motor 0.5 hp
Output Power: 0.06 kW - 18.5 kW
Ambient temperature: -15℃～40℃
Altitude: not more than 1000m
Rated voltage: 380V, optional voltage value between 220 ~ 760V
Rated frequency: 50Hz, 60Hz
Protection level: IP54, IP55
Insulation class: B/F
Cooling method: IC411
Working method: S1
Product Parameter (Specification)
induction motor 0.5 hp
Production Features
Know More Us
Why Us
Service and Packing
Motor Knowledge
During operation, especially when the power is cut off and idling, the parts and types of noise can be used to initially determine the parts and causes of the larger noise:
①The ②～⑥ of the reasons for the larger no-load loss are basically applicable to this item, which is the main reason for the large bearing noise.
② ⑦ among the reasons for the large no-load loss is the reason for the large ventilation noise. In addition, the fan blade angle or size of the axial fan is not correct, the design of the air path (including the exterior and the interior of the three-phase motor) is unreasonable, or there are obstacles in the air path, etc., will increase the ventilation noise (at this time, a similar whistle is often emitted Noise). Block the air inlet hole of the wind hood with cardboard, that is, cut off the air inlet. If the noise is significantly reduced, it can be determined that this is the cause.
