MS series aluminum housing 10 hp 208v 3 phase motor is made of superior materials and conform to the IEC standard. MS motors have good performance, low noise, safety, reliable operation and nice appearance. It can be maintained very conveniently. This series has advantages of little vibration, light weight and simple construction. These series motors can be used for general drive such as water pumps, water treatment, road machinery, petroleum, chemical, metallurgy, cement and paper industries.
Product Detail
Motor Type: 10 hp 208v 3 phase motor
Output Power: 0.06 kW - 18.5 kW
Frame Size: IEC 56 - 160
Number of Poles: 2, 4, 6, 8
Voltage: 220/380V, 380/660V, 230/400V(can be customized according to users)
Frequency: 50 & 60 Hz
Protection Level: IP54 / IP55
Energy Efficiency Rating: IE1 / IE2 / IE3
Insulation Class: B/F
Cooling Method: IC411
Working System: S1
Product Parameter (Specification)
10 hp 208v 3 phase motor
Type | Power HP | Rated Current (A) | Speed (r/min) | Eff (%) | Power Factor CosØ | Rated Torque Tn(N*m) | Tst/Tn | Tmax/Tn | Ist/In | |||||
220V | 380V | 660V | 230V | 400V | 690V | |||||||||
3000rpm.2 poles | ||||||||||||||
MS-112L-2 | 10 | 26 | 15.1 | 8.67 | 24.9 | 14.3 | 8.29 | 2920 | 86 | 0.88 | 24.53 | 2 | 2.2 | 7.5 |
MS-132S2-2 | 10 | 26 | 15.1 | 8.67 | 24.9 | 14.3 | 8.29 | 2920 | 86 | 0.88 | 24.53 | 2 | 2.2 | 7.5 |
1500rpm.4 poles | ||||||||||||||
MS-132M-4 | 10 | 26.9 | 15.6 | 8.98 | 25.8 | 14.8 | 8.59 | 1450 | 86 | 0.85 | 49.4 | 2.2 | 2.2 | 7 |
1000rpm. 6 poles | ||||||||||||||
MS-132L-6 | 10 | 30.2 | 17.5 | 10.1 | 28.9 | 16.6 | 9.62 | 960 | 84.7 | 0.77 | 74.61 | 2 | 2 | 6.5 |
MS-160M-6 | 10 | 29.1 | 16.8 | 9.69 | 27.8 | 16 | 9.26 | 960 | 84.7 | 0.8 | 74.61 | 2 | 2.2 | 6.5 |
750rpm.8 poles | ||||||||||||||
MS-160L-8 | 10 | 31.6 | 18.3 | 10.5 | 30.2 | 17.4 | 10.1 | 720 | 83.1 | 0.75 | 99.48 | 1.9 | 2.2 | 6 |
Production Features





Know More Us


Why Us

Service and Packing

Motor Knowledge
Convert energy into electricity
Generators are divided into two categories, "generators" and "alternators". Generators direct current and alternating current generators produce alternating current. Generators are the first type of generators available for industrial applications. Generators use rotating coils and field coils to convert mechanical energy into direct current. Initially, generators were used to generate electricity, and steam was used as a source of required mechanical energy. Today, motor generators are used outside of some low-power applications, and alternators are more popular in generators. These types of generators convert mechanical energy into alternating current. The rotating magnet acts as a rotor and rotates in a set of conductor coils on the iron core, which becomes the stator. As the magnetic field rotates, they generate an alternating voltage in the stator. The magnetic field can be generated by permanent magnets or excitation coil electromagnets. According to Faraday's law of induction, whenever the magnetic field on a conductor changes (such as a coil), electrons will move perpendicular to the magnetic field, which will generate electromotive force energy, thereby generating electron flow. This is what is used to generate electricity in a generator. In order to generate this magnetic flux, the magnet and the conductor move relatively close to each other, and the wire will be wound into a tight coil, thereby increasing the number of wires and generating electromotive force. By continuously rotating the coil or magnet while keeping the other in place, it will provide a continuous change in magnetic flux and ultimately produce continuous electrical energy.
,
