，
YC series iron housing 5 horsepower electric motor is totally enclosed fan cooled (TEFC) heavy duty motor. The mounting dimension is fully conformed with IEC standard. YC series motors are integrated with up-to-date design, best quality materials construction and possess the features of pleasant-looking appearance, outstanding performance, easy maintenance as well as high starting torque, smooth running, low temperature, low noise and great overload performance. YC series motor are suitable for powering small type drilling machines and water pump, especially for family workshops where only single-phase current is available.
Product Detail
Motor Type: 5 horse single phase electric motor
Output Power: 0.75 kW - 5.5 kW
Frame Size: IEC 90 - 132
Number of Poles: 2 / 4
Voltage: can be customized based on users
Frequency: 50 & 60 Hz
Protection Level: IP54 / IP55
Insulation Class: B / F
Cooling Method: IC411
Duty: S1 (continuous)
Use Conditions: Ambient temperature -15℃-40℃, altitude ≤1000 meters.
Product Parameter (specification)
5 horse single phase electric motor
Type | Power | Current (A) | Speed (r/min) | Eff (%) | Power Factor CosØ | Tst/Tn | Tmax/Tn | Ist/In | |
KW | HP | ||||||||
2 poles | |||||||||
YC112M2-2 | 3.7 | 5 | 24.8 | 2820 | 79 | 0.86 | 2.2 | 2 | 7 |
4 poles | |||||||||
YC132SB-4 | 3.7 | 5 | 26 | 1430 | 79 | 0.82 | 2.2 | 2 | 6.5 |
Production Features
Know More Us
Why Us
Service and Packing
Motor knowledge
YC series three-phase asynchronous motor instruction manual
Motor installation
1.1 Preparations before installation
Before unpacking the motor, check whether the packaging is intact and whether it is wet. After opening the cover, carefully remove the dust and rust layer from the motor. Carefully check for deformation and damage during transportation, and whether the fasteners are loose. Or it is falling off, whether the rotor can rotate flexibly, whether the nameplate data meets the requirements, and measure the high voltage resistance with a 500VMQ meter. The insulation resistance should not be lower than 1MQ, otherwise， the winding should be dried, but the processing temperature should not exceed J20 ℃.
1.2 Installation site and foundation of the motor
The altitude of the installation site of the motor should not exceed 100 () m; the installation site of the general-purpose motor should be dry and clean, the surroundings of the motor should be well ventilated, and a certain distance from other equipment should be kept for inspection, monitoring， and cleaning. The ambient temperature is below 40 ° C, and it is necessary to prevent strong radiation; the installation foundation must be firm and sturdy, have a certain rigidity, and the installation surface should be flat to ensure the balanced operation of the motor.
