，
YT series 5kw 3 phase electric motor is fully enclosed self-fan-cooled squirrel cage three-phase asynchronous motors. It is a new series of motors redesigned by our company based on Y series motors. This series of motors have beautiful appearance, high efficiency, energy saving, good performance, low noise, large starting torque, small vibration, high reliability, and power ratings and installation dimensions comply with IEC Standard and easy to use and maintain. It is widely used in general occasions without flammable, explosive or corrosive gas and machinery without special requirements, such as metal cutting machine tools, pumps, fans, transportation machinery, mixers, agricultural machinery, food machinery, etc.
Product Detail
Motor Type: 5kw electric motor
Output Power: 0.18 kW - 315 kW
Frame Size: IEC 63 - 355
Number of Poles: 2, 4, 6, 8
Voltage: 220/380V, 380/660V, 230/400V, 400/690V (can be customized according to users)
Frequency: 50 & 60 Hz
Protection Level: IP54 / IP55
Energy Efficiency Rating: IE1 / IE2 / IE3
Insulation Class: B/F
Cooling Method: IC411
Duty: S1
Product Parameter (specification)
5000w motor
Type | Power (KW) | Full Load | Rated Torque Tn(N*m) | Ist/In | Tst/Tn | Tmax/Tn | |||
Current (A) | Speed(r/min) | Eff(%) | Power Factor | ||||||
3000rpm.2 poles | |||||||||
YT-112M2-2 | 5.5 | 11.2 | 2840 | 84.7 | 0.87 | 18.24 | 7 | 2.2 | 2.3 |
YT-132S1-2 | 5.5 | 11.2 | 2850 | 84.7 | 0.87 | 18.11 | 7.5 | 2.2 | 2.3 |
1500rpm.4 poles. | |||||||||
YT-112M2-4 | 5.5 | 11.9 | 1420 | 84.7 | 0.81 | 36.48 | 7 | 2.2 | 2.3 |
YT-132S-4 | 5.5 | 11.8 | 1420 | 84.7 | 0.81 | 36.22 | 7 | 2.2 | 2.2 |
1000rpm.6 poles | |||||||||
YT-132M2-6 | 5.5 | 13.1 | 960 | 83 | 0.77 | 54.71 | 6.5 | 2.1 | 2.1 |
750rpm.8 poles | |||||||||
YT-160M2-8 | 5.5 | 13.9 | 720 | 81.4 | 0.74 | 72.95 | 6 | 2.2 | 2 |
Production Features
Know More Us
Why Us
Service and Packing
Motor knowledge
YT series three-phase asynchronous motor instruction manual
2.Starting of the motor
2.1 Inspection before starting the motor
2.1.1 Insulation resistance should be checked before starting a newly installed or deactivated motor for more than three months. The measured insulation resistance value is not less than 1MQ.
2.1.2 Check whether the fastening screws of the motor are tightened, whether the bearings are short of oil, whether the wiring of the motor meets the requirements, and whether the shell is reliably grounded or connected to zero.
2.1.3 Check whether the screws and pins of the coupling are tightened, whether the belt connection is good, whether the tightness is appropriate, whether the unit is rotating flexibly, whether there are jamming, movement, and abnormal sounds.
2.1.4 Check whether the rated current of the fuse meets the requirements and whether the installation is firm and reliable.
2.1.5 Check whether the wiring of the starting equipment is correct, whether the starting device is flexible, whether the contacts are in good contact, and whether the metal shell of the starting equipment is reliably grounded or connected to zero.
2.1.6 Check whether the three-phase power supply voltage is normal, whether the voltage is too high or too low, or whether the three-phase voltage is asymmetric.
2.1.7 Any of the above problems must be completely solved, and it can be started only after confirming that the preparation work is correct.
