，
The ML series dual-value capacitor aluminum shell single phase 2hp induction motor adopts the latest international design and is developed from high-quality materials according to IEC related standards. It has good performance, reliable operation, safety, beautiful appearance, convenient maintenance, low noise, and micro-vibration. A series of advantages such as light weight and simple structure. ML series motors are suitable for air compressors, water pumps, refrigerators, medical instruments, equipment and other small machines.
Product Detail
Motor Type: single phase 2hp induction motor
Output Power: 0.12 kW - 4 kW
Frame Size: IEC 63 - 112
Number of Poles: 2 / 4
Voltage: 220V / 230V / 240V (based on customers` requirements)
Frequency: 50 or 60 Hz
Protection Level: IP54 or IP55
Insulation Class: B/F
Cooling Method: ICO141
Working Mode: Continuous (S1)
Product Parameter (Specification)
Single phase 2hp induction motor
Type | Power HP | Rated Current (A) | Speed (r/min) | Eff (%) | Power Factor CosØ | Rated Torque Tn(N*m) | Tst/Tn | Tmax/Tn | Starting Current (A) | Run Capacitor (uf/V) | Starting Capacitor (uf/V) |
3000rpm.2 poles | |||||||||||
ML90S-2 | 2 | 8.63 | 2810 | 77 | 0.98 | 5.2 | 2.6 | 1.9 | 54 | 40 uf/450V | 150 uf/250V |
1500rpm.4 poles | |||||||||||
ML90L-4 | 2 | 9.04 | 1420 | 77 | 0.96 | 10.08 | 2.3 | 1.9 | 54 | 40 uf/450V | 200 uf/250V |
Production Features
Know More Us
Why Us
Service and Packing
Motor knowledge
Daily maintenance and maintenance of electric motors
Maintenance and maintenance If there is too much dust on the motor surface, it will affect its heat dissipation and cause the winding to overheat; if water, oil or metal chips enter the motor, it will cause a short circuit failure and burn the motor.
Note that the air inlet and outlet of the motor must be unobstructed.
Check the insulation resistance of the motor frequently. In general, the insulation resistance of the motor should not be lower than the phase 380, and the insulation resistance of the motor should be at least 5 to 0 above. Therefore, the working environment is relatively poor, such as in humid, dusty and corrosive gas occasions, pay more attention to checking the insulation resistance of the motor. When the insulation resistance of the motor is found to be lower than the specified standard, it should be dried or varnished, and the insulation resistance should be re-checked to meet the specified standard. Attentions for lamp installation It is required that the following parts of the bracket shall be painted with anti-iron paint except for the galvanized or chrome-plated protective layer; the wooden base of the wooden table shall be painted with a blended paint.
