YT series 3 phase 50 hp ac motor is fully enclosed self-fan-cooled squirrel cage three-phase asynchronous motors. It is a new series of motors redesigned by our company based on Y series motors. This series of motors have beautiful appearance, high efficiency, energy saving, good performance, low noise, large starting torque, small vibration, high reliability, and power ratings and installation dimensions comply with IEC Standard and easy to use and maintain. It is widely used in general occasions without flammable, explosive or corrosive gas and machinery without special requirements, such as metal cutting machine tools, pumps, fans, transportation machinery, mixers, agricultural machinery, food machinery, etc.
Product Detail
Motor Type: industrial motors
Output Power: 0.18 kW - 315 kW
Frame Size: IEC 63 - 355
Number of Poles: 2, 4, 6, 8
Voltage: 220/380V, 380/660V, 230/400V, 400/690V (can be customized according to users)
Frequency: 50 & 60 Hz
Protection Level: IP54 / IP55
Energy Efficiency Rating: IE1 / IE2 / IE3
Insulation Class: B/F
Cooling Method: IC411
Duty: S1
Product Parameter (specification)
Electric ac motor
Type | Power HP | Full Load | Rated Torque Tn(N*m) | Ist/In | Tst/Tn | Tmax/Tn | |||
Current (A) | Speed(r/min) | Eff(%) | Power Factor | ||||||
3000rpm.2 poles | |||||||||
YE2-200L2-2 | 50 | 67.5 | 2950 | 92.5 | 0.9 | 119.8 | 7.5 | 2 | 2.3 |
1500rpm.4 poles. | |||||||||
YE2-225S-4 | 50 | 69.7 | 1480 | 92.7 | 0.87 | 238.8 | 7.2 | 2.2 | 2.3 |
1000rpm.6 poles | |||||||||
YE2-250M-6 | 50 | 70.9 | 980 | 92.2 | 0.86 | 360.6 | 7 | 2.1 | 2.1 |
Production Features




Know More Us


Why Us

Service and Packing

Common failures of vertical motors
Oil slinging in the bearing chamber Most of the large vertical water pump motors are equipped with thin oil-lubricated thrust bearings. The problem of oil slinging in the bearing chambers occurs from time to time, which seriously affects the stable and safe operation of the unit. The problem of oil rejection in the bearing chamber is mainly caused by negative pressure and turbulence. The negative pressure is generated because when the motor is running, a certain negative pressure is formed inside the motor when the axial fan rotates. The oil and gas in the upper bearing chamber of the motor is sucked out by the negative pressure and condenses into oil droplets after condensation. The lubricating oil easily flows over the top edge of the oil baffle barrel into the motor rotor. The turbulence is generated because the motor drives the thrust head of the thrust bearing to rotate at a high speed, and the lubricating oil is stirred rapidly, and the oil flow becomes turbulent, which is milky white and contains a lot of oil. The gap enters the inside of the motor.
At present, the more feasible way to solve the negative pressure is to increase the height of the oil baffle tube in the thrust bearing, and add a floating seal ring outside the oil baffle tube, which can greatly reduce the oil and gas entering the rotor, and at the same time increase the air filter on the oil tank of the bearing. The cleaner plays a role in balancing the air pressure.
,
