Stainless Steel SS316L Sample ValveMicrobial Sterile Sampling ValveConnection ends:Tri ClampClamp Flange Size:25.4mm 50.5mmType:ManualMaterial:SUS316L 1.4404
Introduction to sanitary aseptic sampling valve:
Scope of application: beverage, pharmaceutical
Connection: Threaded, Welded, Clamped
Type (channel location) : straight through
Flow direction: one-way
Drive mode: manual
Purpose: feeding
Applicable medium: water
Pressure environment: normal pressure
Advantages of sanitary aseptic sampling valve:
1. Steam or alcohol can be used for original disinfection.
2. Materials shall be sealed directly with diaphragm.
3. Typical sampling and good repeatability.
4. Eliminate secondary pollution, large sampling, micro sampling can be.
Technical parameters of sanitary aseptic sampling valve:
1. Maximum working pressure (valve closed) : 10bar
2. Maximum sterilization temperature: 121-134℃

Material:
1. Valve body: Stainless Steel304 or 316L
2. Stem: Stainless Steel304 or 316L
3. Sealing ring: EPDM
Working Principle:
The sterile sampling valve is designed to sterilize and sterilize before and after each sampling operation
Selection of sampling materials specifications and sizes:
M4:For handling low viscosity materials such as water, beer, wine and liquid milk
W9:For handling high viscosity materials such as nut yogurt, syrup, 
honey and ice cream
Valve open: sampling
The manual valve can be opened by rotating the hand wheel to open the valve (which can be adjusted).
Valve closed:disinfection treatment
Reverse operating the handwheel, the built-in spring closes the valve while maintaining the same channel between
the two hoses for sterilization.If steam is required, a small pressure regulator at the outlet is recommended.

The connection method:

Product Show:

