The mini type stop reversing valve is used in material flow switching in equipment piping and is widely used in small equipment industries such as laboratories.
Product Details
Technical parameter:
◆Size :1/2"~3/4" DN10~DN20
◆Connection end:Welding, Tri clamp,Thread
◆Max working pressure:≤10bar
◆Supply compressed air:3-5bar
◆Compressed air connection: G1/8"
◆Working temperature:-10℃到120℃
◆Connect with material:SS304/SS316L
◆Interal surface finishing:Ra≤0.8μm
◆Seal material:EPDM、SILICONE、FPM
Working principle:
This model uses compressed air to push the piston in the pneumatic actuator up. The piston rod and the valve stem are connected by a positioning card. At the same time, when the air compression pushes the piston in the pneumatic actuator up, the valve stem is moved upwards to make the valve move. The upper sealing surface is pressed against the upper sealing surface of the valve body, that is, the upper valve port is closed. When the air compression is lower than the spring force or no gas compression, the piston is pushed by the spring under the action of the spring, and the valve stem is moved downward to close the lower valve port. It is mainly used for fluid switching in the pipeline system, and is switched in one way and two ways, and is applied to the piping system without pollution or mixing.