-
E-mail
zhangwei@weiser.cn
- Phone
-
Address
4th floor,C2-A,Xuzhou Software Park,East Jinshan Road,Xuzhou City,Jiangsu Province,China
Membership
Help
Xuzhou Weiser Water Affair Science & Technology Co.,Ltd.Free·1YRS
zhangwei@weiser.cn
4th floor,C2-A,Xuzhou Software Park,East Jinshan Road,Xuzhou City,Jiangsu Province,China
Data accuracy: water meter resolution meets the full range of + 2.5 per 1000.
Monitoring station composition
Automatic monitoring station is an important part of water resources monitoring system, the station should be automatic real-time acquisition and storage level / depth data is sent to the two grade center through the communication network. The station is generally composed of water level sensor, data acquisition device, communication system equipment and power supply unit.
The composition of self reporting / answering monitoring station
This system in the extension of the 40 stations are all self reporting / response monitoring station, self report / response monitoring station by monitoring terminal (RTU with the GPRS communication module, 10AH lithium batteries), 5W solar battery board, a bracket and a float type water level gauge, cable protection box (or real observation wells etc).
Composition form of self reporting / answering type monitoring station
Telemetry terminal
YD-1003 type automatic telemetering terminal for water level
For the water / liquid level monitoring terminal YD-1003 type water level automatic monitoring, data acquisition, storage and transmission function, the integrated structure, has the characteristics of small volume, convenient installation, stable performance, simple operation, low cost, outstanding, is a very suitable for the national conditions of our country, the automatic monitoring system of water resources of the terminal products with water high price.
Model: YD-1003
Size: size (length, width, width, height, height): 220 x 90 x 41 (mm)
Weight: less than 250g (without antenna).
major function
1, access to RS485, analog (4~20mA), intelligent sensors (SDI-12 protocol);
2. It has large capacity FLSH storage. It can automatically store, recycle storage and start / stop storage function at a preset threshold
For example, from a certain time (such as the flood season began) to start recording function, recording function at a certain moment closure (such as the end of the rainy season);
3, with GPRS/CDMA/SMS and other communication methods
4, support self reported, self reported, confirmed, response mode of work;
5, support power down, standby, permanent online mode;
6, support remote wakeup, response center command. In the monitoring station on standby, ready to wake up center testing station for data collection, read or modify any time automatic monitoring station configuration information etc.;
Technical advantages:
7, integrated structure, small size, simple structure, user-friendly design, easy to operate, free maintenance;
8, micro power consumption, in the absence of sunlight or solar panels damage, can work for 2 months;
9, large capacity FLSH memory, support rewritable;
10 、 bidirectional communication under low power consumption mode;
11 、 real time and historical data calculation function;
12. All interfaces have photoelectric isolation or surge protection circuit.
WFX-40 series mechanical coding water level sensor
Characteristics and uses
The special anti skidding machine for measuring cable can be used in any wind and wave environment.
This series of instruments are designed and manufactured according to the national standard GB/T11828.1-2002. The instrument level rate, surge serious environment, with good accuracy and stability, especially suitable for hydrological station and reservoir station, dam station, hydropower station, remote station use.
This series of equipment by the absolute value of encoding type water level sensor, float, suspension, counterweight and other components, is independent of the water level observation and measurement instrument, and can display, gate opening device, gate hoist control system is connected, composed of computer integrated display and control system (such as locks, hydropower stations, pumping pumped storage power station, agricultural irrigation system, water supply and drainage system); water level configuration of RS485 communication interface device, can directly communicate with the computer machine, network composed of hydrological automatic monitoring system, hydrological satellite telemetry system; configuration storage recording unit can be widely used in hydrological station.
This series of instruments is suitable for use in fine wells and general logging with a diameter of 25 cm to 30 centimeters.
Three. Technical parameters
Measuring range: 10M, 20m, 40m, 80m
Resolution: 1cm
And the measurement accuracy: less than 2cm or 0.2%F - S
- output code: 10 ~ 13bit gray
Field monitor: decimal mechanical counter
Data output interface (option): built in serial RS485 interface;
Built in 4-20mA analog output
Power supply voltage: 12 ~ 24V DC
Float diameter: 150mm, 100mm
Measuring cables: 1mm multicore stainless steel cables
Use environment: ambient temperature: -25 ~ 85 c;
Relative humidity: <90% (40)
Size: 132 x 132 x 115mm