Cable Sleeve Sockets

Products Features:

Screw terminals.

Single part body with robust design.

Cable glａnd and sealing.

Strain relief and protection against kinking.

Models:

※ Special voltage/color as per customers' requirement 

Dimensions:

Experimental description

Sａnd dust test:

One of the first issues we need to consider when manufacturing products that can be used everywhere is the environment in which the products are used.To facilitate evaluation of the suitability of the product for storage,transportation or operational use in exposed to dry or dusty atmospheres.

The sａnd dust test uses an artificial mold dust environment to check the dust resistance of the product.Determine if the product can be used for a long time in a variety of harsh natural environments.

Rain test:

As we all know,whether the product is in the working state or the storage state,it will be affected by various liquids to varying degrees.When it is penetrated,flowed,impacted and accumulated by the liquid,it will have various effects on the material and performance of the product.It will even destroy its structure.Therefore,the impact of various liquids on the product cannot be ignored.

The purpose of the rain test is to determine the ability of the enclosure to prevent liquid penetration and to work stability and reliability when or after liquid erosion,when subjected to various liquid erosions.

High and low temperature test:

There are many kinds of natural environmental factors and induced environmental factors that exist in the surface of the earth and in the atmosphere,ａnd there are no fewer than a dozen factors that affect the use and life of electrical products.The effect of temperature changes on the product is most obvious.

Under the conditions of low temperature and high temperature,the environmental simulation test is carried out on the physical and other related characteristics of the product.After the test,the performance of the product is judged by the test to determine whether the product can still meet the predetermined requirements.

Insertion force test:

When designing a product,we will first determine a reasonable range of temperature rise,within which we try to make the product feel better.

The purpose of the insertion force test is to convert the degree of sensuous hａnd into rational data for product design,improvement,identification and factory inspection.

Glow wire test:

The danger of fire is self-evident.Fires caused by electrical equipment in modern life are increasing year by year.Parts of electrical products may ignite due to component overload and poor contact.

The hot wire testing machine uses simulation technology to assess the risk of fire stress caused by thermal stress in a short time due to a heat source such as a hot component or an overload resistor.