50a Battery Connector

This safety quick 50a battery connectors are widely applied in various field. This kits always are equipped in Electrical, folk lift, electric folk truck, golf car, tour bus and many other power-driven tools to solve the power-out problem. The terminal pins are made of red copper coated by silver, which has a strong electrical conductivity and can reduce the resistance to make the current and voltage stable. The mark of positive and negative are printed in the connector to avoid the miss plug. In the kit, a couple of boot caps are included to protect this quick connect and disconnect kits from the dust.

Features of 50a Battery Connector

Silver plated contacts - offers greater longevity when using high power, elevated temperature applications.Terminals can either be crimped or soldered to the cables.

Mechanically keyed housings - (Interlocking pairs) prevents accidental component mating (each connector slots into the other - there is no male and female version)

Single-piece housing - provides industrial strength quality and durability.Flat wiping contact system - wiping action cleans the contact surface during disconnection.

Install of 50A battery connectors:.

1. Strip the insulation to fit the terminal pins.

2. Insert the cable into the terminal pins.

3. Crimp the terminal pins.

4. Insert terminal pins in housing with notched side of tongue next to spring.

5. Final adjustment Push contacts and cable into housing until the notched tongue snaps over end of spring; tug slightly to make sure contact is locked into place.