Welcome Customer !

Membership

Guangzhou JASU Precision Machinery Co., LTD
Free Member ·1YRS
,
Other

Main Products: 吹塑机

Xwboo>Products

PP Bottle Making PET Stretch Blowing ISBM Machine PMMA PLC 100ML

Model
Nature of the Manufacturer
Other
Product Category
PET Bottle Blow Molding Machine
Place of Origin
City, Province
Overview
PP Bottle Making PET Stretch Blowing ISBM Machine PMMA PLC 100ML
Product Details

Sbr Blow Moulding Machine, Blow Moulding Machine Cost, Stretch Blow Moulding Machine
 
Why blow moulding machine / stretch blow moulding machine

 

Conventional Single-stage process: The bottles are produced on machines that implement BOTH steps 1 and 2 by using PET raw material to mould preforms and then directly stretch-blow-moulding these preforms into the finished bottles or jars.

 

Single-stage machines are well suited to medium production rates as well as for containers with non-standard necks, for which preforms would not be readily available in the market. About 20% of the PET bottles and jars produced globally are made with single-stage machines.

 

Such machines typically have three or four stations (injection/conditioning, stretch-blowing and container ejection) with a rotary indexing table for transferring the preforms between stations.

 

Stable performance with advanced PLC.

Perform higher speed, automatic producing and no flash or trimmings

PID control achieves precise and steady temperature

No contamination and low noise with the air cylinder to drive the action instead of the oil pump.

Equipment parameters and process are set by HMI for living supervising of the equipment operation and its matching up with the panel switches and buttons, enables convenient, direct and highly efficient operation of the whole system.

 


Data Sheet of JASU Injection Stretch Blow Moulding Machine (ISBM) / PET Preform Manufacturing Machine

 

ItemUnitMachine Type
ISB 1100AN-3
Injection PartScrew Diametermm50
Screw L/D RatioL/D24:1
Screw Speedr/min0-150
Theoretical Injection Capacitycm3481
Injection PressureMPa176
Max. Hydraulic PressureKg/cm140
The Actual Injection Quantityg(ps)452
Oz16
Screw Strokemm245
Clamping PartBlow Clamping ForceKN150
Clamp TonnageKN600
Wheel Diametermm1100
Max. HeightPP, PET, PETG, Tritan, PS, PCmm200
PC, PETG, Tritan, PSmm220
Open Vertical Mode Tripmm570
OthersMax. Pump PressureMPa16
Servo MotorKw22
Mode Opening/Locking Motor (Double Pump)Kw22
Electric PowerKw12.2
Tank VolumeL420
Dimension of Machinem4.5*1.95*3.4
Machine WeightT9
--Parameters are subject to change without prior notice.
--Providing PC, PET, PP, PS, PETG, TRITAN screw barrels according to customers' requirements.

 

PP Bottle Making PET Stretch Blowing ISBM Machine PMMA  PLC 100ML 0


Injection stretch blow moulding machine is widely used for various plastic materials and has broad application prospects

 

Wide mouthed jars for a variety of food and non-food applications

 

Cosmetics Packaging: mascara, lotion, cream etc.

Food and beverage bottles such as jar, can, tin, pot, kettle, cruet etc.

Pharmaceuticals bottles / Medicine bottles: syrup bottles, eye drops bottles, pills bottles, oral liquid bottles, intravenous drip bottles etc.

 

Shapes: cylinder, jar, oblong, square, plain round, wide-mouth, oval, non-round, ultra-light etc.

 

PP Bottle Making PET Stretch Blowing ISBM Machine PMMA  PLC 100ML 1


Why JASU Precision Machinery?


We are THE FIRST to manufacture One Stage Injection Stretch Blow Molding Machine in China on basis of digestion and absorption of the advanced technology from Japan and Germany.
Manufacturer/Direct Factory with production base takes 24000m2.
Own highly qualified technical staffs (20-30 persons) and R/D center.
Obtained a number of technical patents.
Market network throughout the country , and export to many countries of East Europe, South America, South Africa etc.
Our machine enjoyed high reputation among customers.
Overseas sales increase 33% annually.
Service technicians (holding visa and passport) are on call and able to serve on site and instruct via voice and videos.

 

PP Bottle Making PET Stretch Blowing ISBM Machine PMMA  PLC 100ML 2


Question & Answer


Q1: Are you a factory or trading company?
A1: We are established in 2003, a actual factory and manufacturer in the line of injection blow molding machine for 18 years.
Q2: Where is your factory located? How can I visit you?
A2: Our factory is located in Panyu District, Guangzhou, Guangdong Province, China, about 48 minutes by high-speed railway from Hong Kong.
5 minutes driving away from Shiqiao subway station.
We can book hotel for you and pick you up from CAN BAIYUN airport or Guangzhou south railway station.
Q3: How about the payment term?
A3: Advancement (subject to our marketing strategy and both parties' discussion) and settle the balance payment prior to delivery.
Q4: What about your main market?
A4: Our machines were sold well in China, also exported and enjoyed a good reputation among customers from Europe, Russia, Southeast Asia, Middle and South America, Africa etc.
Our customers widely spread over Russia, Italy, Poland, Turkey, Netherlands, Sweden, Bulgaria, Brazil, Ecuador, Thailand, India, Myanmar, Malaysia, Vietnam, Cambodia, Egypt, Algeria, South Africa, Ivory Coast, Philippines, Bangladesh......
Q5: How does your factory do regarding quality?
A5: Quality is the most important principle. JASU people always attach great importance to quality controlling from the very beginning to the very end. Our factory has passed ISO and CE certification. Patents and many other certificates obtained also tells this. 
Q6: What about warranty and do the engineers available to overseas?
A6: One year warranty. During this period, if you need any support on installation, adjustment , operation or maintenance, our engineers can go abroad to fix for you.
Q7: Others?
A7: We will request the working voltage and power frequency at the buyer's side when he placing the order.
Each order will be fulfilled as a turn key project of machine.

  1. We will check and test the machine and send the video to the customer for reference prior the delivery.
  2. Attache/send an operational manual in English version with the shipment.
  3. To use the machine only need to connect power and connect to the air supply and water supply according to the manual or video instructions if requested.
  4. Service technicians are on call to instruct via voice and videos. They all hold visa and passport and be able to serve on site.​

PP Bottle Making PET Stretch Blowing ISBM Machine PMMA  PLC 100ML 3

 

Similar Product Recommend