Introduction of heavy hammer crusher
Heavy hammer crusher is used for crushing a variety of medium hardness and brittle materials which compression strength not exceeding 150 MPa, such as limestone, coal and other materials.

Mainly used in cement, mining, coal preparation, power generation, chemical and building materials industry. The material can be adjusted according to demand, rough, medium and small, complete specifications; multi-angle multi-edge to ensure compression strength. Especially suitable for highways, construction, and large-scale engineering materials.
It is called as reversible no-grate hammer crusher because its rotor is reversible without a grate. It solves the problem of crusher being blocked by wet material, improves hammer utilization ratio, reduces the frequency of hammer change and ensures uniform granularity of discharged material.
Features of havey hammer stone crusher:
1. The heavy hammer crusher (boulder broken) with a large feed size, high yield, low energy consumption, simple structure, easy maintenance.
2. PCZ-type heavy hammer crusher broken stone, a molding, without more crushing process, you can reduce the cost of about 40%, low energy consumption, less investment. Compared with the same output of the jaw crusher, can reduce the investment in equipment, with less investment fast.
3. The heavy hammer crusher with no grate design, for wet materials, soil and more broken raw materials, eliminating the clogging of the adhesion of the suffering.
4. The heavy hammer crusher with alloy composite hammer, reducing the consumption of wear parts, long service life reducing the production cost of about 35%
5. Compact structure, less wearing parts, easy maintenance, etc.
6. Hammer broken seal body structure to solve the crushing plant dust pollution and dust leakage problem.
Working principle of heavy hammer crushers:
The heavy crusher uses impact force to crush materials. The motor drives the rotor rotating at high speed in the crushing cavity. Materials enter into the hammer crusher through the upper feed opening, crushed after being hit, impacted, sheared and grinded by rotating hammers.

Beneath the rotor, there is a sieve plate, and the crushed materials with size smaller than the sieve size will be discharged by the sieve plate. Meanwhile, the coarse grains with the size larger than the mesh continue to stay on the screen plate and be repeatedly impacted and grinded by the hammer continuously, finally discharged through the sieve.
Technical data
Model | Rotor (Dia.*L mm) | Feed opening (mm) | Output size (mm) | Capacity (t/h) | Motor Power (kw) | Weight (t) | Dimension (mm) |
PCZ-1308 | 1310*790 | 850*800 | <30 | 100-160 | 132 | 15.6 | 2818*2100*2390 |
PCZ-1510 | 1500*950 | 1000*850 | <30 | 160-210 | 132*2 | 17.1 | 3260*2370*2750 |
PCZ-1512 | 1500*1160 | 1210*900 | <30 | 220-270 | 160*2 | 18.9 | 3260*2580*2750 |
PCZ-1615 | 1650*1452 | 1500*1200 | <30 | 360-420 | 200*2 | 28 | 3456*2915*3185 |
PCZ-2015 | 2000*1500 | 1500*1400 | <30 | 450-500 | 250*2 | 56 | 3880*2990*3560 |