Introduction of cyclone dust collector
Cyclone dust collector is designed specifically for high dust load, high temperature, and product recovery applications. It has a mechanical separator that uses centrifugal force to remove large and high-volume dust from industrial applications.
It is a high-efficiency cyclone separator designed to effectively remove large to moderate size particles (chips, metal grindings, sawdust) from the air stream. Used alone or in conjunction with another dust collector, the Cyclone separates coarse contaminants from fine, non-visible particles and exhausts clean air.

Features of cyclone dust collector
1. simple structure, no moving parts, do not need special accessory equipment, cover small areas, less investment in manufacturing, installation.
2. Low running cost, optimized parameter design, stable operation, low resistance and high efficiency.
3. Reliable performance, guarantee the stable operation of duster accompany with the crushing equipment, less maintenance.
4. Removable cone section for easy replacement, wide adaptability, be suitable for a wide range of dusty gas.
5. The airtight sealing system ensures minimum dust leakage.

Working principle of cyclone dust collector
Dirty air enters the unit at a high speed and is then spun around in a spiral motion, throwing particles against its cone wall. Centrifugal force pushes the larger or heavy dust particles down through the narrow part of the cone and into a collection drum or hopper.
The dust once in contact with the wall, will lose the inertia force and momentum near the entrance velocity and its own gravity along the wall falling into the collection bucket. Rotary airflow decline at the cone base, axial position along the precipitator to up. The formation of internal rotation flow increased, and the exhausting from collector tube.
Cleaned air runs back up through the center of the unit and is discharged back into the atmosphere or into an after-filter for further processing.
Technical data
Model | Inlet wind speed(m/s) | Wind volume (m2/h) | Resistance (Pa) | Efficiency (%) | Dimension (mm) | Weight (kg) |
CLK-Ф150 | 10-20 | 210-420 | 100 | 95 | 380×1210 | 33 |
CLK-Ф200 | 10-20 | 370-735 | 100 | 95 | 466×1916 | 52 |
CLK-Ф250 | 10-20 | 595-1190 | 100 | 95 | 566×2039 | 75 |
CLK-Ф300 | 10-20 | 840-1680 | 100 | 95 | 631×2447 | 103 |
CLK-Ф3150 | 10-20 | 1130-2270 | 100 | 95 | 716×2866 | 143 |
CLK-Ф400 | 10-20 | 1500-3000 | 100 | 95 | 808×3277 | 225 |
CLK-Ф450 | 10-20 | 1900-3800 | 100 | 95 | 893×3695 | 279 |
CLK-Ф500 | 10-20 | 2320-4650 | 100 | 95 | 983×4106 | 347 |
CLK-Ф600 | 10-20 | 3370-6750 | 100 | 95 | 1150×4934 | 612 |
CLK-Ф700 | 10-20 | 4600-9200 | 100 | 95 | 1325×5176 | 819 |