Introduction of Shake Table
Mineral processing shaking table is usually composed of three parts: the bed, rack and transmission mechanism; besides the above, there are also flushing tank, feed chute, and base.
Shaking table is one kind of main equipment of gravity concentration, which is widely used in minerals separation of tungsten, tin, tantalum, niobium, gold and other rare metals and precious metal ores.
It is applied in different separations of rough concentration, elaborate concentration and scavenging concentration, which can process coarse sand (2-0.5mm), fine sand (0.5-0.074mm) and ore slurry(0.074). It also can be used in processing iron, manganese ore and coal. The effective recycling granularity range of shaking table is 2-0.22 millimeters during processing tungsten, tin ores.

Features of Shake Table
1. High concentration ratio, high concentration efficiency, easily operated, and once gets the final concentrate and gangue.
2. Easiness to take charge and easy to adjust, simple to tune for optimal performance.
3. Keep table surface operate balanced even though changing cross fall and stroke.
4. The springs with compact structure are placed on the table.
5. The final concentrated ore and gangue can be obtained once.
Working principle of Shake Table
Shaking table consists of head motion, decks, and frame, feed, and water box. The beneficiation process is worked on the tilting deck with grooves.
Feed the material into ore feeding port and water into water feeding port. It affected by impulsive force of the horizontal water flow, inertia force and frictional force caused by the asymmetric reciprocating movement of the deck.
Then the mineral particles are separated based on their different specific gravity and particle size to form a fan-shape. Finally, the material are separated and discharged as concentrates, middlings and tailings.
Technical data
Model and Specification | Grit concentrator table | Fine sand concentrator table | Sludge concentrator table |
Table Size(mm) | Length | 4450 | 4450 | 4450 |
Driving part Width | 1855 | 1855 | 1855 |
Concentrate part Width | 1546 | 1546 | 1546 |
Feeding size (mm) | 2 | 0.5 | 0.15 |
Feeding capacity (t/d) | 30-60 | 10-20 | 15-25 |
Density (%) | 25-30 | 20-25 | 15-25 |
Stroke (mm) | 16-22 | 11-16 | 8-16 |
Frequency (F) | 45-48 | 48-53 | 50-57 |
Bed surface Water quantity (t/d) | 80-150 | 30-60 | 10-17 |
Bed surface Horizontal obliquity(°) | 2.5-4.5 | 1.5-3.5 | 1-2 |
Bed surface Portrait obliquity (%) | 1.4 | 0.92 | ---- |
Table board corner(°) | 32-42 | 40 | 42 |
Concentrating area(㎡) | 7.6 | 7.6 | 7.6 |
Bed surface Length ratio | 2.6 | 2.6 | 2.6 |
Shape of side-bed surface | Rectangle | Zigzag | Triangle |
Motor power(kw) | 1.1 | 1.1 | 1.1 |