Welcome Customer !

Membership

Zhengzhou Hengxing Heavy Equipment Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 干燥设备

Xwboo>Products

Zhengzhou Hengxing Heavy Equipment Co., Ltd.Free·1YRS

  • E-mail

    postmaster@zzhxmachine.com

  • Phone

    +86-371-67858720

  • Address

    No.8 Hongye Road, West Hehuan Street, High-Tech Zones, Zhengzhou ,China

Contact Now

Rotary Lime Kiln

Model
Nature of the Manufacturer
Other
Product Category
Building Material Equipment
Place of Origin
City, Province
Overview
Rotary Lime Kiln
Product Details

Introduction of rotary lime kiln

The lime rotary kiln is widely used in the fields of building materials, metallurgy, chemical industry, environmental protection, etc. Lime rotary kiln can be divided into cement kiln, metallurgy chemical kiln and lime kiln according to the different materials processed.


It mainly consists of kiln body, sealing device for kiln tail, main and auxiliary driving device, burning device, discharging device, speed regulation, instrument control, PLC programming, interlocking device, and dust-extraction device, etc.


The lime rotary kiln is mainly used to calcine cement clinker; In the process of non-ferrous and ferrous metallurgy, such as iron, aluminum, copper, zinc, stannum, nickel, wolfram, chromium, etc. the rotary kiln can be used to sinter and roast ore, concentrate, intermedium, etc. The lime kiln is mainly used to calcine limestones.

Rotary Lime Kiln Operation

Features of rotary lime kiln

1. The lime rotary kiln shell design fully take into consideration of the corner at shell flexible supporting to extend the lifetime of refractory bricks and castings.

2. Adopt supporting roller bearing with big diameter and the small ratio between length and diameter to improve the reliability. The bearing is automatic self-sliding bearing.

3. Sturdy structure, smooth running, large capacity.

4. The better sealing effect of new type open gear hood sealing type.

5. The spring lamination overlying type flexible sealing, double layer spring lamination sealing increase the heat insulation layer to improve the reliability and lifetime.


Working principle of rotary lime kiln

The lime rotary kiln is a cylindrical vessel, inclined slightly to the horizontal, which is rotated slowly about its axis. The material to be processed is fed into the upper end of the cylinder.


At first, preheat the limestone to above 800℃, they will start to compose, And then, they will be pushed into the kiln for further burning by the push rod actuator.  As the lime rotary kiln rotates, material gradually moves down towards the lower end and may undergo a certain amount of stirring and mixing.


Hot gases pass along the kiln, sometimes in the same direction as the process material (co-current), but usually in the opposite direction (counter current).


The hot gases may be generated in an external furnace or may be generated by a flame inside the kiln. Such a flame is projected from a burner pipe (or "firing pipe") which acts like a large Bunsen burner. Until the temperature reaches about 1200 ℃, materials cooled by the cooler, they will be discharged out.


Technical data


Capacity

(t/h)

Product

Rotary Kiln

Preheater

Burning temperature

Cooler

Heat consumption
(KJ/Kg Cao)

Spec.(m)

Effective
volume(m³)

150

active
 lime
 light
calcine
 dolomite

φ 2.5*40

142

Circular
 vertical
 preheater

1350/1250

Circular
 vertical
 cooler

5300/5000

200

φ 2.8*42

190

250

φ 3*46

235

300

φ 3.2*50

292

350

active lime

φ 3.5*54

390

1350

5225

400

φ 3.6*56

430

500

φ 3.8*58

505

Square
 vertical
 cooler

5100

600

φ 4*60

575

750

φ 4.3*58

670

Shape
 vertical
 preheater

4810

800

φ 4.3*64

738

1000

φ 4.8*68

1005


Similar Product Recommend