Introduction of bucket elevator
Bucket elevator includes chain bucket elevator, movable bucket elevator, TB series vertical bucket elevator.
The machine is applicable for conveying powdery, granular and lumpy materials, such as coal, cement, block, sand, clay, and ores. The bucket elevator is capable of conveying materials with high temperature when armed with special circle chain structure.
Bucket elevator is applicable for conveying the power, grain and block materials, such as coal, cement, block, sand, clay, and ore. The bucket elevator is allowed to convey materials with high temperature when armed with special circle chain structure.
The machine has the advantages of big conveying capacity, high hoisting height, stable and reliable operation and long service life.

Features of bucket elevator
1. Inlet section can be control fed or flood loaded with bulk materials
2. Small driving power. Since the bucket conveyer adopts flow-in material feeding, inductive material discharging and a large amount of material bin intensive arrangement, when the materials are elevated, there is almost no material returning and material digging, and the reactive power is little.
3. The bucket type lifer has a very wide range of lifting. This series of hoist bucket almost has no requirements for the types and features of the materials, so that it can elevate not only common powder and small particles but big materials with high grinding features.
4. This series of plate chain bucket elevator has good operational reliability since advanced designing principle and processing method ensures the operational reliability of the whole machine.
5. Long service life. The material feeding of the bucket elevator adopts flowing type without feeding with the use of the cabin so that there is no squeezing and collision among the materials.

Working principle of bucket elevator
One of the most efficient ways to elevate bulk materials vertically is with a bucket elevator. A Bucket Elevator consists of a series of buckets attached to a belt or chain with pulleys or sprockets located at the top and bottom of the unit.
The buckets are located in a casing or housing to contain the material. Bulk materials are loaded into each bucket as the bucket moves past an inlet point.
Technical data
Model | Capacity(m³/h) | Lifting height (m) | Bucket distance (mm) | Motor power (kw) |
200 | 8-15 | 28 | 500 | 3-5.5 |
250 | 10-25 | 30 | 500 | 4-7.5 |
300 | 25-35 | 30 | 500 | 5.5-11 |
315 | 30-40 | 40 | 512 | 5.5-15 |
400 | 40-60 | 40 | 512 | 11-22 |
500 | 65-80 | 40 | 512 | 15-30 |
600 | 100-120 | 40 | 688 | 18.5-37 |