3 Ton Chain Block Prices

Introduce

HSZ chain block is a kind of widely used and portable manual operating hoisting machine, it can be used in machine installation, products lifting, loading and unloading in industry, agriculture, construction and mineral production. It is suitable to be used in the open air and no electric power works.

Features

• Gear: they innovated symmetrical arrayed high speed synchronous gear and made from international standard steel. more strong and steadier.

• Chain: adopt high strong chain and high precision welding technology, meet ISO international standard. Fit for heavy and overload working conditions, take your hands a better feeling

• Hook: made of high-class alloy steel, it has high strength and high security, by using new design, weight will never escape disconnect.

• Plastic Plating: adopt advanced plastic plating technology inside and outside, it looks like a new one after years of operation.

• Housing: made of high-classed steel, more firmly and dexterous.

Specification Parameters

Notes:

How does chain hoist work:

A Chain Block (also known as a hａnd chain hoist) is a mechanism used to lift and lower heavy loads using a chain. Chain blocks, contain two wheels which the chain is wound around. When the chain is pulled, it winds around the wheels and begins to lift the

item that is attached to the rope or chain via a hook.

What is a manual chain hoist ?

Manual chain hoists are simple mechanical devices that use a geared transmission and chain to raise a load. The hａnd controlled loop of chain turns a chain wheel that is attached to a short drive shaft which is connected to a series of gears.

What is the difference between a hoist and a winch ?

A hoist is for lifting and a winch is for pulling. A Winch is geared for pulling a load on a relatively level surface. A winch uses a dynamic brake that must slide. A Hoist is geared to lift (dead weight) and has a locking brake that can support a "hanging".

Strict quality control system for chain block

1. Before Raw material coming, we do micro test and chemical analysis.

2. Every hoist we do 1.5times load test. 99% test

3. Before load chain assemble on the hoist, every 100M load chain will choose 5M in the top and bottom for breaking test.

4. Before packing, we also do operation test.

5. Every month will do breaking test and endurance test to ensure the stable quality of spare parts

Chain block maintenance

1. Clean off the dirt on the hoist and smear the gears and bearings with grease after use. Store it in a dry place to keep it from rust and corrosion,

2. The maintenance and repair of block should be done by skilled hands. Never allow any layman to disassemble the block which may easy causing accident.

3. Align the 0" marks of the two gears while assembling. as shown in Drawing 2.

4. Keep clean the friction surfaces of the brake. Inspect the brake mechanism regularly to prevent the faulty braking causing accident.

5. After cleaning and repairing, the hoist should be subjected to no-load test and heavy load test. A chain hoist can be put into operation after it has been tested and found in good condition.