HY High-performance butterfly valve is a double eccentric butterfly valve.
Double Eccentric Butterfly Valve
We offer double offset butterfly valves designed with durability in mind. The angled and firmly seated disc, the optimized seal design and the corrosion-resistant shaft end area are all features that exceed market standards.
Our product range
One-piece seat and stainless steel seat
Plate Tray (DN150-2800) and Flow Tray (DN700-1200)
IP67 gearbox, IP68 gearbox and gearbox with ISO flange
PN10, PN16 and PN25
Tilt plate for extended life
After a few degrees of opening, the tension on the disc is released, minimizing wear on the disc seal. Additionally, the design minimizes seal compression, ensuring low operating torque.
Safety disc and shaft connection
The disc and shaft are connected by keys and keyways. The keys are secured with two set screws to prevent chattering caused by the flow rate and the necessary clearance in the key and keyway connection. In the large size, the disc is held in place with two stainless steel drive pins, with a key and keyway as a backup.
Two seat designs
The one-piece seat design integrates a machined and epoxy-coated ductile iron seat into the body. The stainless steel seat is designed with a replaceable stainless steel seat ring sealed with an O-ring to avoid leakage under the seat ring.
Disc seal optimized for high performance
The shape of the disc seal ensures that it is held in the correct position, providing a very reliable function. The excellent rubber quality reduces the amount of rubber used to ensure a low closing torque. EPDM seals are DVGW, KIWA and WRAS certified.
Shaft Design Features
Shaft seals are replaceable under pressure for easy maintenance. EPDM seals ensure internal and external tightness, while NBR seals protect against impurities and fluids from the outside.
Butterfly valves are available with an optional locking device that locks the disc in the open/closed position if the gearbox needs to be replaced.
Low friction PTFE bearings ensure low operating torque and protected shaft ends ensure durability as no uncoated ductile iron surfaces are exposed to the medium.
Two-way slim design
Even though valves DN700 and above are marked with an arrow indicating the preferred direction of flow, these valves are bidirectional. We've also minimized weight, making handling easier and less stressful on the environment.
The driver of your choice
We offer any type of drive. Our standard options are an IP67 gearbox with handwheel for above ground installation, an IP68 gearbox for buried service and an ISO input gearbox for mounting electric actuators. In addition, we offer extension rods, adapters and handwheels.
certified product
Double eccentric butterfly valve passed
DVGW in DN150-1200
KIWA DN200-600
WRAS in DN700-1200
For larger sizes, all components are approved.
Where is the double eccentric butterfly valve used?
Double eccentric butterfly valves are most commonly used in underground water supply applications as an alternative to gate valves. When installing butterfly valves underground, lower burial depths are required, and they are generally more cost-effective than gate valves, especially at larger sizes. They can of course also be used on the ground.
Operational Principle:
HY High-performance butterfly valve is a double eccentric butterfly valve. For the dual eccentric structure, during the opening process, the disk gradually leaves the seat, and the friction between the sealing surface is reduced, thus extending the service life. The seat is lip type, the material of PTFE, RPTFE and other ultra-high molecular weight polyethylene, no matter how the fluid direction, the seat can always return to the original position after deformation, to ensure the sealing performance.
HY series High Performance Butterfly valve are divided into PTFE seat and PTFE + metal seat sealing structure, both with zero leakage in the pressure test. The flow characteristics of such valves are approximately equal to the percent.
Advantage:
1. Reasonable design, compact structure, easy installation and disassembly, easy to repair.
2. With high-performance regulation and cut-off functions.
3. Use the eccentric structure to reduce the friction of the sealing ring and extend the service life of the valve.
4. Fully sealed, with zero leakage. It can be used in ultra-high vacuum conditions.
5. Replace the valve plate sealing ring, butterfly plate, rotating shaft and other materials, which can apply to a variety of media and different temperatures.
Application Area:
It is mainly suitable for water plant, power plant, steel mill smelting, chemical industry, water source engineering, environmental facilities construction and other system drainage use, especially for waterway pipeline, as regulation and interception equipment. Compared with the midline butterfly valve, the dual eccentric butterfly valve is more high pressure resistant, longer life and good stability. The larger the caliber than other valves, the lighter the material, the lower the cost.
| ♦ Standard | ISO10631, EN593, API609, GB/T12238 |
♦ Size | NPS 2”∼48", DN40~1200, JIS 50~600A |
♦ Rating | 150LB-600LB, PN6-PN100 |
♦ Suitable Temperature | -50°C ~200°C |
♦ Category | Concentric-pivoted, Double Eccentric,Triple Eccentric |
♦ Material | FCD, WCB, WC6,WC9,CF8, CF8M |
♦ Seat | PTFE, RPTFE, 304+PTFE |
♦ Packing | NBR, EPDM, VITON, FLEXIBLE GRAPHITE, PTFE |
♦ Driving Operation | Lever-type, gear-type, Pneumatic Actuator, Hydraulic Actuaor, Electrical Motive Operation |
♦ Related standard | API 609, EN 593, JIS F7480, API 598 , EN 12266, JIS F7400 |