Two-piece full-bore ball valves have a spherical disc that opens and closes the flow of fluid. The valve is manufactured to industry standards for pipeline closure applications. Valves are mechanical devices that control flow and ensure pressure in a piping system or process.The valves are fully manual operated without any additional gearing or power assist. It should be equipped with a blue or
Ball Valve Flange Type
This type Ball Valve is a valve, whose disc, the movable part to stop the flow, is a circular ball. When pressure is pushed out on the ball, it is moved off its disc allowing fluid to pass through the inside. When the fluid pressure decreases, the ball slides back into its position on the inside disc. But This Ball valves are only used in liquid systems and can be produced in GG25, GG40 at HY Valves scope.
Applicable Fluid: Water
Working Pressure: Less than 10Kgf/CM2 (MAX.1.0Mpa)
Applicable Temperature: Less than 80 Degree.
Connection Method: 10K FF or RF Flange
Hydraulic Test: Body: 15Kgf/CM2(1.5Mpa) Seat: 11Kgf/CM2(1.1Mpa)
Certificate: ISO9000, CE
Flanged ball valve: a special type of valve
A ball valve is an isolation valve used to open and close process media flowing through a piping system. Ball valves are manufactured in different designs and standard materials. Such designs and materials greatly affect the application range of ball valves. Flanged ball valves are ball valves designed to have flanged ends. It belongs to the end entry valve category and is primarily used for closing applications in most hydraulic circuits. Flanged ball valves fully open and close the flow of working fluid when needed and are most effective at providing positive sealing shutoff. It is generally not suitable for regulation and throttling purposes.
Flanged ball valve products can be made of various standard materials such as carbon steel and stainless steel. The mentioned materials are the most commonly used because of their temperature and corrosion resistance properties. However, ball valves made of polymeric materials are more durable than other types of ball valves when used in corrosive applications.
Flanged ball valves are used for a wide range of fluid and gas applications. Some of the gas types commonly handled by flanged ball valves are natural gas, propane-butane, lighting gas, and biogas. In addition, these ball valves can effectively supervise the flow of oxygen, water, steam and other corrosive and non-corrosive liquids. Some industrial settings where flanged ball valves are used include energy supply and power plants, pipeline construction, wastewater treatment plants, steel processing facilities and power stations.
The main components of a flanged ball valve include the valve body, cover, ball, valve seat and valve stem. The cover is equipped with a flange, which is mainly used to install the valve into the piping system. Flanged ball valves can be manually operated by positioning their levers at specific angles in the open and closed positions. This type of ball valve can also be operated by using electric or pneumatic actuators. The dimensions of valve flanges used for actuator mounting can vary, but generally conform to certain standards, such as ISO 5211. The correct actuator size for a flanged ball valve should be determined based on the maximum operating pressure drop across the ball.
Flanged ball valves are an important part of the technological process. If the ball valve fails to provide absolute shutoff, leakage will occur and cause corrosion. Corrosion that occurs in flow systems can seriously damage not only equipment, but also infrastructure and the environment. Poorly performing flanged ball valves can lead to unplanned maintenance and increased operating costs. Therefore, high performance flanged ball valves are those that are reliable, easy to maintain and can be used for a long time.
Manufactured high quality flanged ball valve units can withstand the temperatures and pressures created by the flow of certain service liquids. In terms of installation, many flanged ball valve models can be installed anywhere in the piping system. The best ball valve products on the market require little adjustment after installation. It is expected to be simple, easy to operate, compact, and available for most flow control applications. These devices provide fast steering operation and require minimal pressure drop.

What is a flange end ball valve
1 . What is a flanged ball valve?
The inside of the ball has a hole that allows fluid to pass freely when it is perfectly aligned with the ends of the two valves. The valve seals well when the bore is perfectly perpendicular to the end of the device. If the orifice is at any other position or not perpendicular to the valve end, the flow will be partially or completely interrupted.
Ball valves can be classified according to a variety of criteria:
Design: Floating or trunnion mounted
Number of ports: Standard 2-port design type (1 inlet and 1 outlet)
Bore diameter: reduced diameter or full diameter
Body Assembly: Single, 2 or 3 Pieces
Ball access: top entry or side entry
Seat Type: Metal or Soft Teflon
2. What is fire ball valve design? fire damper
The design is to block or maintain a strategic distance from flammable fluids, liquids or gases to pass through at any rate at any rate in the middle of that time period, not in isolation aggregates. Hazards are present in installations in the oil and gas, chemical and petrochemical industries, so valves with a fire safety design are reliable in the event of a fire. Standard features and benefits of fire safety valves:
Blowout Prevention System
Anti-static device
Fire seat design
Rubber O-ring stem seal maintains stem alignment, reduces packing side loading and wear, and improves stem seal performance.
Dual body seals ensure positive sealing of body joints against pipe stress.
Multiple stem seals.
3. How does the floating ball valve work?
The ball valve is a float valve design. The ball is suspended in the flowing fluid and held in place by being pressed against the ball by two resilient seats. A shaft attached to the top of the ball allows a quarter of a 90 degree rotational motion to easily switch the valve from the open to the closed position. When the shaft moves, the ball is loaded and the ball is pressed against the seat. The floating design is lightweight and economical. It can accommodate bores up to 10 inches, if the bore is larger than 10 inches, the valve seat will not be able to withstand the heavier ball and the valve will not operate efficiently and safely.
When the valve operates under medium pressure, the float will move against the downstream valve seat. The valve seal is a single-sided seal. The float valve has an upper stem that allows a slight displacement of the ball. When the valve is closed, the floating ball is pressed against the sealing surface under the action of pressure to achieve sealing. This valve is suitable for medium to low pressure and small bore valve sizes.
4.How to assemble the ball valve?
High velocity liquid
When the ball valve is frequently operated on high-velocity liquids, please check the valve drawing or diagram to minimize the possibility of seat deformation, especially when used in high-pressure and high-temperature pipelines. 6.2
Valve selection
Valve selection is important and design specifications to meet the required pressure and temperature conditions. Be careful when selecting seat material, as fluids containing abrasives may degrade the seat.
Valve installation
Before installing the valve, inspect the pipe bore to verify that there are no weld spatter, scale, or rust particles inside. When installing the flange end ball valve, locate the flange bolts diagonally and tighten evenly.
Valve opening
Ball valves belong to the category of on-off valves and require attention to maintenance and maintenance. This is to ensure that the ball valve can fully open and close when installed in a piping system. Opening the valve can cause the seat to corrode and possibly cause seat leakage. Pipelines requiring ball valves for throttling service should be designed with consideration to the amount of seat leakage that may occur in their fully closed position. Remember that the ball valve should be stored in the fully open position.
High temperature and high pressure service
The manufacturer's recommended pressure and temperature ratings are an appropriate guide to the maximum operating pressure and temperature range that the valve can withstand. However, when the ball valve is under the following conditions, a reference to the valve distributor is required to ensure its suitability
The valve is closed for a long time under high temperature or high differential pressure.
Working frequency for a long time at high temperature.
Frequent changes in line pressure or operating temperature.