| Valve series | 1032-2 Barbed type valve |
| Structure | Direct-acting diaphragm, 2 way NC |
| No.of ports | 2(specified inlet and outlet) |
| Tube size | Suitable for 2.5-3.5 mm inner diameter soft tube (shore hardness is about 55-75 degree). If the tube is too soft, small wire should be attached to increase the sealing reliability |
| Body material | PPS |
| Diaphragm material | EPDM,FFKM |
| Voltage | 12V/24V |
| Orifice diameter | 2.5mm |
| Flow rate | 8.5g/s(25℃,50KPa ,H2O) |
| Power consumption | 3.5W |
| Withstand pressure | -70KPa~0.2MPa |
Direct-acting diaphragm type structure:
| Main features | 1.High flow, cost-effective |
| 2.High pressure resistance, long lifetime |
| 3.Small internal volume, small dead volume |
| Application | 1.Mediums including water, air,organic solvents,ink and acid-base reagents etc. |
| 2.Suitable for working conditions such as sampling module, cleaning module, dilution module and waste liquid draining module etc. |

| Regular Model | Suitable Medium
|
| 1032-22-EPN/5N | Water, weak acid-base reagents etc. |
| 1032-21-TPN/5N | Some acid-base reagents |