Technical Parameter:
*Measuring range:
. Direct measuring range 0-100mm
. Comparative measuring
External size 0-500mm
Internal size
With large or small measuring yokes, with insertion
Depths of 4-50mm 10-200mm
With'Magic Eye's device 1 -20mm
. External thread pitch diameter measurement up to 180mm
. Internal thread pitch diameter measurement, with insertion depths of 10-50mm 14-140mm
Minimum scale unit: 0.001mm
*Work stage:
. Vertical travel: 100mm
. Transverse travel: 25mm
. Scale unit of micrometer drum: 0.01mm
*Maximum diameter gripped by the tailstock:
. While length of workpiece is less than 85mm φ 180mm
. While length of workpiece is equal to 200mm φ 20mm
*Maximum inaccuracy:
. External size
If scale correction list is not used: (1.5+L/200)μ M
If scale correction list is used: (1 +L/200)μ M
. Internal size
If scale correction list is not used: (2+L/200)μ M
If scale correction list is used: (1.5+L/200)μ M
(Note: L-Length being measured in mm)
*Repeatability of the instrument:
. External measurement: 0.3μ M
. Internal measurement: 0.5μ M
*Dimensions of the instrument: 1000*370*620mm
*Weight of the instrument: 115Kg
Main Accessories:
Internal measuring device: Large and small measuring yokes, fixed tail sleeve.
" Magic Eye" Device: Ball-tip measuring insert, insulated stage.
External thread measuring device: Three-wire holder, horizontal center cradle, and Φ 14 flat contact tip.
Internal thread measuring device: Floating stage, 9 pairs of thread gauging balls, V-jaw gauge block 600.
Contact tip: Flat contact tip of Φ 2 and Φ 8, knife-edge contact tip of 1.5*8, spherical contact tip of R20.
Horizontal projection optimeter tube
Large and small movable measuring yokes
| Model | JD18 |
| Measurement range (mm) | Absolute measurement | 0~100 |
|
|
| Relative measurement (mm) | External size | 0~500 |
| Internal size:when using measuring hook | 10~200 |
| Internal size:When using electric measuring hook | 1~20 |
| Intermediate diameters between external screws | 0~180 |
| Intermediate diameters between internal screws | 14~140 |
| Minimum division value | 0.001mm |
| Measuring force |
| 1.5N~2.5N |
| Readout transaction data of the gauging spindle | Measurement of external size | 0.3μm |
| Measurement of internal size | 0.5μm |
| Measurement accuracy | Measurement of external size | ≤(1+L/200)μm |
| Measurement of internal size | ≤(1.5+L/200)μm |
| Universal worktable | Division value of horizontal micro-drum | 0.01mm |
| Horizontal stroke | 25mm |
| Vertical stroke | 100mm |
| load capacity | 10kg |
| Maximum diameter gripped by the tailstock | When the length between 0~85 | φ180mm |
| When the length to 200 | φ20mm |
| Fitting size for the measuring cap's internal diameter | φ6H7 |
| Size of outer diameter between the reference rod and the measuring cap's internal diameter | φ6g6 |
|
| Overall size (mm) | 1000×370×620 |
| Weight | 127kg |