JX-0602

• Nominal Pressure: 1.6MPa
• Working Medium: Water, Non-corrosive liquid
• Working Temperature: -20℃≤t≤150℃
• Thread to ISO228
• Note: Sealing Material is Brass
• Swing check valve size: 1-1/4 inch BSP female x female threaded.
• Swing check valve material: Brass.
• Max pressure: 200 Psi.
• Wide application: Applicable for water, steam, oils, nitric acid, urea, and more. They are mainly used in petroleum, chemical, pharmacy, fertilizer, and electricity pipelines.
• Good sealing: The lifting and closing parts are opened or closed by the medium flow and the force, and the sealing property is suitable to prevent liquid leakage. This type of valve should be installed horizontally, allowing only the medium to flow in one direction to prevent accidents.

Swing Check Valves are used for water and other liquids. Swing Check Valves can be installed in horizontal or vertical upward flow pipe systems. The valve should be fitted with a rubber-faced seal for low-pressure applications and air or gas systems where bubble-tight closure is necessary. The current range does not include this facility, but such a feature can be made available for special orders. Applications and uses Check Valve range are available with water, oil, and air up to 20 bar.

A brass swing check valve, also known as a ballcock, is important for plumbing systems. It is used to prevent the backflow of water and the buildup of pressure in the system. A brass swing check valve can leak or burst if installed correctly or maintained regularly. There are some other things you should know about this device before installing one on your own!

-A brass swing check valve is available in many different sizes. Be sure to choose the right size for your system!

-The valves are also available in either threaded or flanged ends. Choose the type that will fit best with your plumbing system.

-A brass swing check valve should be installed so that water flow is always going in the same direction. This will help to prevent leaks and bursts.

-Be sure to keep the valve clean and free of debris buildup. This can cause the valve to leak or burst.

-If you notice that your brass swing check valve is leaking, it may need to be repaired or replaced. Contact a professional plumber if you have any questions or concerns.

-Be sure to have a backup plan in place in case of a valve failure. This could include having a pump or other device available to help move water through the system.

-A brass swing check valve is an important part of your plumbing system. Be sure to install one and keep it maintained regularly for optimal performance!

____________________________________________________________________

-A brass swing check valve can leak or burst if it isn’t installed correctly or maintained regularly.