JX-0327

220v 110v 24v shut-off 3-way electric actuator ball valve

The temperature of the Media: Medium Temperature
Power: Solenoid
Media: Water
Port Size:1/2″-1″
Structure: BALL
Rotate angle:90°
Working pressure:≤1.6Mpa
Medium temperature:
-10℃~125℃
Valve material: BRASS
Thread end: ISO228
IP class: Ip56
SIZE; DN15、 DN20、 DN25
ITEM(2 WAY OR 3 WAY)
Voltage;AC220V,AC110V,AC24V,DC24V
Current,0.04A,0.08A,0.3A,0.05A
Watts,8W,8W,7W,1.5W
Torque,5Nm,5Nm,5Nm,5Nm
Switching time,12s/24s,12s,12s,15s
Rotate angle,90°

How Do Solenoid Valves Work?

This valve is a three-way ball valve with automatic pressure release, which can be used to control water flow and temperature. It has an actuator that controls the opening and closing of the flow path. The solenoid 3-way electric actuator ball valve is designed for high-pressure applications, such as water supply or hydraulic systems.

The 20V-110V, 24V 3-way electric actuator ball valve is a versatile and reliable solution for controlling water flow. This valve can be operated either manually or by an external power source. The solenoid is powered with 110 volts and has a solid air-tight seal to keep the fluid locked in the system. It also features a convenient built-in safety feature that will shut off both power inputs before any damage can occur if something goes wrong with your setup. This product comes as shown, ready to install and use!

Solenoid 3-way electric actuator ball valve for 20v 110v 24v.

A self-contained, automatic pilot-operated solenoid-actuated three-way electric actuator ball valve designed to control the flow of liquids and gases in a system. It has an integral magnetic latching mechanism that locks the plunger in its seated position when power is removed from the coil. The actuator is available with many combinations of voltage ratings and stroke lengths.
The product can be supplied with various materials, including steel, stainless steel, bronze, or hard rubber seals depending on operating conditions such as temperature range and pressure rating requirements.
It comes in standard configurations with threaded connections -1/2″ BSP, NPT,3/4in, and 1in

An actuator ball valve is a control valve that uses an electric motor to move a plunger, or “actuator,” which opens and closes the valve. This allows for fast opening and closing times and high flow rates. A solenoid 3-way electric actuator ball valve is typically used in industrial settings when different pressures are on either side of the chest wall. To turn off the supply from one side, it must first be isolated by turning off the other side with a shut-off device like this one. These valves are commonly found in water treatment plants where they can isolate feed lines coming into storage tanks during maintenance periods.

Close-off: 350 psi (24.82 bar) non-shock cold working pressure.

Max: 50 psi (3.45 bar) for typical applications.

Why chose our Products

The valves hold a long service life that ensures the fixing is appropriate for the duration expected for the valve’s life. It is important to note that these aspects are applicable even if the valve is not used for a given period increasing the reliability and durability of the valves.