TaiZhou，ZheJiang-
E-mail
info@plumberstar.com
-
Phone
86-576-82529985
-
Address
NO.7 Qinggang Industrial Zone, Yuhuan City, Taizhou, Zhejiang Province, China
Product Categories
Taizhou Jiaxin Metals Co., Ltd.Free·1YRS
Parameters of Thermostatic Mixing Valve With Sensor Head
NegotiableUpdate on December 01
- Model
- Nature of the Manufacturer
- Manufacturer
- Product Category
- Radiator Valve
- Place of Origin
- XiAn City, ShanXi Province
Overview
Parameters of Thermostatic Mixing Valve With Sensor HeadHomeproductThermostatic Mixing Valve With Sensor HeadCategory Radiator ValveTags Heating valve, hot water valve, mixing valve, Radiator valve, Raditator, thermostatic valve, TRVThermostatic radiator valves can give you greater control over the temperature of your home.Additional informationMaterials:CW617N, H58-3Finising:Sａnd blasted, Sa......
Product Details
Thermostatic Mixing Valve With Sensor Head
JX-0661
Water Thermostatic Mixing Valve with Thermostatic sensor remote Head
The TRV valve’s Head with remote sensor. The water temperature range from 20°-70°C. The TRV sensor valve can be inserted in our cockpit art.212 (cockpit length 132 mm). Suitable to feel the cold water and hot water temperature in underfloor heating systems and regulate at a fixed value. Temperature locking and limiting device on the desired value. Both operations can be done without tools.
Temperature range;6~28 degrees C
Graduate marker:1~5
Defrost protect 6 degrees C
Max. working pressure 1.0Mpa
Application: General The temperature of Media:
Medium Temperature
Power: Manual
Media: Water
Structure: Regulating Standard or Nonstandard:
Work Pressure:0.05Mpa – 1Mpa
Cold Water Supply Temp.: 4-29.
Hot Water Supply Temp.:55-85.
Out Water Temp. Range:20-50.
Radiator Valve
Valve Size | 1/2″ and 3/4″ |
|---|---|
Valve type | Straight valve and Angle type |
Valve Materials | Brass (Chrome Plated) BS EN 12164 CW617N |
Finish | Sandblasted and nickel plated |
Working Temperature | Maximum Water Temperature 120°C |
Body | Chrome Plated Brass |
Working Pressure | 10bar |
Thread connection: | 15 mm Compression |
Finish | Chromium-plated finished brass body with 15 mm compression |
Valve Operation | Manual Radiator Valve |
Tailpiece | The tailpiece and collar with integrated seal make for a fast and leak-free join |
Adaptor | Complete with a compression adaptor allows for installation onto either threaded or smooth pipe to suit site requirements |
Nickname | TRV |
O ring | NBR |
Hydraulic Seals | Rubber EPDM |
A Thermostatic Mixing valve With Sensor Head is a cost-effective way to maintain hot water temperature in your home while saving energy. The valve is installed at the bottom of your water heater and can be set to turn off when it reaches an average temperature. This saves energy because you don’t have as much heat being lost in the cold air, and it also helps keep the house warmer by keeping more warm air inside rather than having all that heat escape through an open window or door.
Many heating systems use a thermostatic mixing valve with a sensor head. This component is specially designed to control the flow of hot and cold water through pipes to maintain the desired temperature throughout your building. The primary function of this type of device is to provide a steady stream of heated or cooled water. It also helps save energy bills by maintaining the desired setpoint for the building’s occupants rather than constantly adjusting the temperature based on current conditions.
The Thermostatic Mixing Valve with Sensor Head is an air-operated valve that regulates the water temperature to the desired setpoint. When this device is used with a hot water recirculation pump, it can control warm and cold water temperatures. The sensor head provides accurate readings of ambient room temperature so that the valve can be adjusted accordingly. This type of system often has two or more lines connected to it and multiple zones for different rooms within the home.
Similar Product Recommend