1.the material of the filter core is PTF,Pplysulfone,nylon,pp,acetyl cellulose2.the diameter of the filter hole is 0.1μm,0.22μm,0.45μm,1μm,3μm,5μm,10μm,30μm,60μm,and it is selective as hydrophilic (suitable for gas) and hydrophilic (suitable for liquid) according to your requirement.
Plate Filter Press can be applied for most particles so it is broadly for precision filter and sterilization. 1.the material of the filter core is PTF,Pplysulfone,nylon,pp,acetyl cellulose2.the diameter of the filter hole is 0.1μm,0.22μm,0.45μm,1μm,3μm,5μm,10μm,30μm,60μm,and it is selective as hydrophilic (suitable for gas) and hydrophilic (suitable for liquid) according to your requirement.
Main Parameters
| Operating Conditions |
| Max operating pressure | 0.3Mpa |
| Max operating temperature | 80℃ |
| Connection |
| Connection of shell | Flange |
| in&outlet | Tri-Clamp |
| Pressure gauge | Tri-Clamp |
| Vent/Drain valve | M6 Thread/Tri-Clamp |
| Material |
| Shell | 304、316L |
| Vent/Drain valve | 304 |
| Quick-open,Stabilizer blade | 304 |
| O-ring | EPDM/PTFE/Viton/Silicone |
| Surface Finish |
| Finish type | Mechanical/Electrolytical polishing/Sand blasting |
|
| Polishing precision | 0.3um inner surface Ra≤0.3um 0.4um outside surface Ra≤0.4um |
| Selection Table |
| Filter Flow(M3/H) | Model of Membrane | Shell Material | In-outlet connection | O-ring |
| 2 | φ300 | SUS304 | Flange | EPDM |
| 4 | φ500 | SUS316L | Tri-clamp | PTFE |
| 7 | φ700 | | Screw thread | Viton |
| 10 | φ800 | | | Silicone |
| we can design drawing according to your requirement. |
|