Welcome Customer !

Membership

Youfumi Valve&Pipe Co.,Ltd.
Free Member ·1YRS
WenZhou,ZheJiang
Manufacturer

Main Products: Check Valve|Other Valves

Xwboo>Products
Product Categories

Youfumi Valve&Pipe Co.,Ltd.Free·1YRS

  • E-mail

  • Phone

    0577-86869991

  • Address

    -1Qianjie Street High-tech Zone Longwan District Wenzhou City Zhejiang Province China

Contact Now

PFA Lined Cross

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
XiAn City, ShanXi Province
Overview
PFA Lined Cross
Product Details

 

Lining Processing Specification:

PFA Lined Fittings By Injection Molding


Product parameter:

Nominal diameter: DN25~DN300

Temperature range: -29°C~200°C

Applicable medium: Able to transport any concentration of acid, alkali, organic solvents, strong oxidant, toxic and volatile, flammable chemicals

 
   


 

Specification Instruction:

Youfumi manufactures lined pipe and fittings by compression molding, isostatic molding, injection molding, transfer molding, hot rotomolding, ram/paste extrusion, 3D rotational molding etc. Characters as below:   


●Working temperature is high at the range of -29°C-200°C; except the molten alkali metals, element fluorine and aromatic hydrocarbon, 

lined products can be used in any chemical medium.

●Vacuum resistance. In the range of -29°C-150°C, it is applicable for vacuum condition. In chemical production, the vacuum condition occurs due to cooling, longitudinal emissions, or medium backflow. 

●High-pressure resistance. Within temperature working condition, it can sustain the working pressure of 3.0MPa.

●Resistance to penetration.  Adapt the high-quality PTFE, to make it of high density and enough thickness after advanced lining processing, make it excellent antiosmosis.

●PTFE advanced lining molding process achieved the status of syn chronous hot expansion or cold shrinkage for steel components and fluorine plastic. 

●Youfumi adopts the standard size according to HG, GB, DIN, ANSI, and JIS etc., which improves interchangeability, to provide convenience for installation. 


Specific Gravity: 2.14-2.19g/cm3 as per ASTM D 792 test standard.

Tensile Rate: 20.7Mpa minimum as per ASTM D 638 test standard.  

Elongation Rate: 250% minimum as per ASTM D 638 test standard.

Manufacture Standard: ASTM D 4895. Operating in vacuum condition within 150°C.