Welcome Customer !

Membership

Shijiazhuang Boda Industrial Pump Co., Ltd.
Free Member ·1YRS
JiaZhuang,HeBei
Manufacturer

Main Products: Slurry Pump|Diaphragm Pump|Sewage Pump

Xwboo>Products
Product Categories

Shijiazhuang Boda Industrial Pump Co., Ltd.Free·1YRS

  • E-mail

    sales@bodapump.com

  • Phone

    0086-311-89255090

  • Address

    North of Shilipu Village, Chang'an District, Shijiazhuang, China.

Contact Now

IH Stainless Steel Chemical Pump

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
XiAn City, ShanXi Province
Overview
IH Stainless Steel Chemical Pump
Product Details

IH Chemical Pump General Description

IH series pump is a single suction and single stage cantilever centrifugal one for chemical industry use, which adopts an international standard, being in conformity with the standards in ISO2858、ISO3069、ISO3661. This product is confirmed by the Mechanical Industry Department of the state to take place F type corrosion – resisting centrifugal pump (above 50 diameter)for it is an energy – saving novel product. Its efficiency is 3~5% higher than F type pump, the cavitation residual volume is superior and sucking function is fine, which is suitable to convey the liquid with erosion, being able to apply on the departments of chemical industry, petroleum, metallurgical industry, paper making, food, pharmaceutical industry and compound fabric industry etc.

Specifications: Capacity: 6.3~1150m3/h, Head: 5~125m

Working pressure: ≤2.5MPa,i.e. intake pressure + head≤2.5MPa,Casting iron material: ≤1.6 MPa

Working temperature: -20℃~80℃

The meaning of the model: IH80-50-200A

IH—A series of international standard chemical industry centrifugal pump

80—Inlet diameter 80mm

50—Outlet diameter 50mm

200—Nominal diameter of impeller 200mm

IH Chemical Pump Feathers of Structure

The pump consist of pump casing, impeller, sealing ring, pump cover, shaft and bearing house etc. The pump adopts a structure of rear-door, for facilitating maintenance without dismantling pipe system of inlet and outlet. Much convenience in application.

The pump casing is designed with feet below, and discharge is positioned upward, suction in the axial.

The size of the pump flange adopts GB9113.3-88(1.6MPa),equivalent to HG20595-97(1.6MPa).

Rotor part is supported by rolling bearings, the bearing uses N32 machine oil for lubrication, if you want to use grease for lubrication, please make a note in the ordering.

The impeller nuts adopt steel spacer for preventing loose, which can effectively prevent loose and misplace of the impeller nuts due to the vibration in the operation and reverse rotation.

Oil meter adopts automatic making-up type, so to guarantee the lubrication during operation, thus raising up the lifetime of the pump.

Viewing from the end of driver, the rotation direction of the pump is in clockwise.

The material of parts which contact with liquid are made by 1Cr18Ni9、1Cr18Ni9Ti、1Cr18Ni12Mo2Ti、304、304L、316、316L、904、alloy 20#、CD4MCu、Hastelloy alloy etc. we can also adopt the other corrosion-resistance materials according to user' s requirement.

IH Chemical Pump Shaft Sealing

The shaft sealing adopt with stuffing sealing, single mechanical sealing, or double –end mechanical sealing. In case that the pump suction pressure is bigger, it is advised to select balance mechanical sealing.

The stuffing sealing is used in the case that the requirement for site in clearance is not strict and a little leakage is permissible. Or in case that the liquid conveyed is easily crystallized or contained with grain, it is also advised to use stuffing sealing.

The mechanical sealing is characterized by the function reliable, leakage less and life time longer. It divides single mechanical sealing and double mechanical sealing. In which the double mechanical sealing is suitable to apply on the occasions in high temperature, being flammable, easily blasting, and easily volatilizing poisonous agent and with strong erosion, with suspending particles, easily crystallized and with fabric agent.

There sets up an automatic flush device in the inside of single mechanical sealing. Whereas the double mechanical sealing needs connecting with the outside for flush liquid, which is various in degree due to the difference in pumping liquid, temperature and pressure etc. working conditions. The flush liquid takes clear water or medium pumped. In case that the temperature of the agent is high or contained with grain, it should conduct cooling proceed to the agent first, after filtering then getting through into sealing cavity.

The pressure of washing liquid should be 0.05~0.1MPa higher than the pressure in the front of sealing cavity. Before starting the pump, it needs to open washing and cooling system at first, and not to cut off that system before stopping operation.

Flush liquid pressure: Pump suction pressure + Head×45%

(Maximum not above 0.8MPa for unbalance mechanical sealing)

冲洗液温度 Flush liquid temperature:<40℃

冲洗液流量按下表 Flush liquid capacity:

机械密封规格(mm)

Mechanical seal specification

<45

45~60

60~80

冲洗液流量(升/分)

Flush liquid capacity(L/m)

4

5

6

IH Chemical Pump Performance Table:

NModelRev=2900r/min Medium density=1000kg/m³
FlowPump headηInletOutletNpshPowerWeight
(m³/h)(m)(%)(mm)(mm)(m)(kW)(kg)
1IH25-20-12522027φ25φ2020.7555
2IH25-20-16023225φ25φ2021.160
3IH25-20-20025022φ25φ2022.285
4IH32-20-1253.62032φ32φ2021.160
5IH 32-20-1603.63230φ32φ2021.570
6IH32-20-2003.65027φ32φ202.53100
7IH40-25-1256.32039φ40φ252.51.565
8IH40-25-1606.33236φ40φ252.52.275
9IH40-25-2006.35032φ40φ252.55.5120
10IH40-25-2506.38028φ40φ252.57.5165
11IH50-32-12512.52050φ50φ322.52.270
12IH50-32-16012.53248φ50φ322.54120
13IH50-32-20012.55045φ50φ322.57.5155
14IH50-32-25012.58039φ50φ322.511220
15IH65-50-125252062φ65φ502.5385
16IH65-50-160253258φ65φ502.55.5135
17IH65-40-200255052φ65φ402.511190
18IH65-40-250258049φ65φ402.515250
19IH80-65-125502066φ80φ6535.5105
20IH80-65-160503264φ80φ65311170
21IH80-50-200505060φ80φ50315210
22IH80-50-250508056φ80φ503.530360
23IH100-80-1251002073φ100φ803.511175
24IH100-80-1601003269φ100φ803.515215
25IH100-65-2001005065φ100φ653.530350
26IH100-65-2501008062φ100φ65445480
27IH125-80-1601603270φ125φ80430410
28IH125-100-2002005069φ125φ1004.555590
NModelRev=1450r/min Medium density=1000kg/m ³
FlowPump headηInletOutletNpshPowerWeight
(m³/h)(m)(%)(mm)(mm)(m)(kW)(kg)
1IH25-20-1251524φ25φ2020.3751
2IH25-20-1601822φ25φ2020.3756
3IH25-20-200112.520φ25φ2020.5568
4IH32-20-1251.8528φ32φ2020.3755
5IH32-20-1601.8827φ32φ2020.5560
6IH32-20-2001.812.523φ32φ202.50.5580
7IH40-25-1253.2535φ40φ252.50.3758
8IH40-25-1603.2833φ40φ252.50.5565
9IH40-25-2003.212.530φ40φ252.51.188
10IH40-25-2503.22025φ40φ252.51.1115
11IH50-32-1256.3545φ50φ322.50.5560
12IH50-32-1606.3842φ50φ322.50.5570
13IH50-32-2006.312.538φ50φ322.51.190
14IH50-32-2506.32034φ50φ322.51.5140
15IH65-50-12512.5557φ65φ502.50.5564
16IH65-50-16012.5853φ65φ502.51.178
17IH65-40-20012.512.546φ65φ402.51.5100
18IH65-40-25012.52043φ65φ402.52.2165
19IH80-65-12525562φ80φ652.81.185
20IH80-65-16025859φ80φ652.81.597
21IH80-50-2002512.555φ80φ502.82.2115
22IH80-50-250252053φ80φ502.84185
23IH100-80-12550565φ100φ8031.5110
24IH100-80-16050861φ100φ8032.2140
25IH100-65-2005012.557φ100φ6534260
26IH100-65-250502054φ100φ6537.5330
27IH125-80-16080868φ125φ803.24280
28IH125-100-20010012.565φ125φ1003.57.5330
29IH125-100-2501002070φ125φ1003.511360
30IH125-100-3151003267φ125φ1003.518.5430
31IH125-100-4001005064Ф125Ф1003.837520
32IH150-125-2502002074φ150φ1253.822460
33IH150-125-3152003269φ150φ125445580
34IH150-125-4002005066φ150φ125475760
35IH200-150-2504002076φ200φ1504.255590
36IH200-150-3154003273φ200φ1504.575820
37IH200-150-4004005070φ200φ1504.51101080
38IH250-200-2506502078Ф200Ф1504.575940
39IH250-200-3156503275Ф200Ф1504.81101160
40IH250-200-4006505072Ф200Ф15051321380
41IH300-250-25010002079Ф300Ф2505.51101320
42IH300-250-31510003277Ф300Ф25061601750
43IH300-250-40010005074Ф300Ф25062502380

IH 化工泵介绍 IH 化工泵明细_副本 化工泵应用领域_副本