YOUTHPOWER ALL-in-One residential ESS integrated home storage system with Lifepo4 batteries and hybrid inverter 5.5KVA, provide power to connected loads by PV power, utility power and battery power and store surplus energy from PV solar modules when needed.


We are always ready to supply the first-class products and meet the various needs of the customers. The All-In-One home ESS includes all the parts including built in hybrid inverter, lithium iron battery, controller, charger and management software, protection switch etc. Easy connection in about 30 minutes.
Part Number: YP ESS0530EU
Brand: YouthPOWER
Inverter:Hybrid 5.5KVA LV SINGLE PHASE
Battery Voltage: 51.2V
Capacity:30KWH ( 3 single battery modules )
| Product Specification | |
| MODEL | YPESS0510EU |
| Maximum PV Input Power | 6500 W |
| Rated Output Power | 5500 W |
| Maximum Charging Power | 4800 W |
| PV INPUT (DC) | |
| Nominal DC Voltage / Maximum DC Voltage | 360 VDC / 500 VDC |
| Start-up Voltage / Initial Feeding Voltage | 116 VDC / 150 VDC |
| MPP Voltage Range | 120 VDC ~ 450 VDC |
| Number of MPP Trackers / Maximum Input Current | 2 / 2 x 13 A |
| GRIDINTPUT | |
| Nominal Output Voltage | 208/220/230/240 VAC |
| Output Voltage Range | 184 - 264.5 VAC* |
| Max. Output Current | 23.9A* |
| AC INPUT | |
| AC Start-up Voltage / Auto Restart Voltage | 120 - 140 VAC / 180 VAC |
| Acceptable Input Voltage Range | 170 -280 VAC |
| Maximum AC Input Current | 40 A |
| BATTERY MODE OUTPUT (AC) | |
| Nominal Output Voltage | 208/220/230/240 VAC |
| Efficiency (DC to AC) | 93% |
| BATTERY & CHARGER | |
| Nominal DC Voltage | 48 VDC |
| Maximum Charging Current | 100 A |
| PHYSICAL | |
| Dimension, D X W X H (mm) | 214 x 621 x 500 |
| Net Weight (kgs) | 25 |
| BATTERY MODULE | |
| Capacity | 10KWH |
| PARAMETERS | |
| Nominal Voltage | 48VDC |
| Full Charge Voltage(FC) | 52.5V |
| Full Discharge Voitage(FD) | 40.0 V |
| Typical Capacity | 200Ah |
| Max Continuous Discharging Current | 120A |
| Protection | BMS, Breaker |
| Charge Voltage | 52.5 V |
| Charge Current | 30A |
| Standard Charge method | CC (Constant current) charge to FC, CV (Constant voltage FC) charge till charge current decline to <0.05C |
| Inner Resistance | <20m ohm |
| Dimension, D X W X H (mm) | 214 x 621 x 550 |
| Net Weight (kgs) | 55 |

![]() | ●Flat design, slim in thickness at only 0.2m, covering less than 0.35m2 for area, easy installation ●All-in-one design, integrated hybrid inverter, Li-ion battery system and electric protective devices ●Smart management, quick and convenient maintenance via platform. ●Modularity in design, flexible configuration, easily add additional storage units. ●Monitor system remotely via smartphone or web portal |

For household use, night time use of stored solar energy or reducing electricity bill.
●Home solar energy storage system, hospital, school, office space charged by grid or solar
●Back-up emergency power supply when no enough grid or solar supply.
●Replaced of diesel generator to avoid noise.
●For small office, or outdoor for real independence of electricity.











Q: Where to use the All In One ESS?
A: No power area, such as remote village or suburban of country without enough grid supply but rich with solar. Also for the power outage area where the grid or power voltage is not stable always with power failure. Some high electricity price area also consider the All-In-One ESS to offer you a utility time of use rate plan.
Q: Why we need a All In One ESS?
A: As a standby power supply, it provide continuous seamless power for your family or electrical equipment fail during the power outages.
Q: How long will the inverter system run when there is a power failure?
A: The amount of backup time is determined by the size of the connected battery bank and the load drawn from the system. The backup time is directly in proportion to the load drawn. The backup time is normally calculated at full load (i.e. if the system is a 2200VA system, full load is 2200VA). If you remove some of the connected load, then the backup time will be extended accordingly.
Q: What’s the difference between 2 versions solar batteries?
A: 1st version is our open version for most customers without module design inside.
New version solar battery is special designed with Alu. Battery house with outer look and working with module setting as EV assembly battery modules. See difference as below photo:

,
