Welcome Customer !

Membership

Dongguan Yuntong Co., Ltd
Free Member ·1YRS
,
Other

Main Products: 轮胎回收机械

Xwboo>Technical Article>Processing Of Automatic Scrap Tire Recycling Plant
Processing Of Automatic Scrap Tire Recycling Plant
Date: 2022/12/7Read: 67

Processing of Automatic scrap tire recycling plant

1、Cut the bead and pull out the steel wire by wire bead extractor.

2、Shred the tire into 50mm rubber chips by shredder.

3、Crush the rubber chips into 2-13mm rubber granules by 1st granulator.

4、Separate the steel wire with rubber granules by magnet separator.

5、Separate the coarse fiber with rubber granules by line vibrating screen.

6、The 2-13mm rubber granules come into 2nd granulator for 0.5-5mm rubber granules.

7、Separate the fine fiber with rubber granules by line vibrating screen static electricity.

8、The fine fibber will be collected in fiber collector inbox.

9、The rubber granules will be sent to airflow classify separator ,the remained fine fiber cleaned and sent to fiber collector inbox.

10、The pure rubber granules will be stored in rubber granules storage bin.

11、The rubber granules milled into rubber powder by pulverizer

12、The rubber powder separated by 3 layer vibrating screen by the size.

13、Rubber powder packed by automatic weigh packer

14、The dust and waste gas purified by the environmental protection equipment and the innoxious and colorless gas will be emitted.