Wheel washing machine

Bucket Wheel Sａnd washing machine is used to remove the dust in sand. Sａnd washer aims at improving the quality of sand. The materials include the required gravel in building-site, gravel factories, hydropower station and concrete dam site, post and electric pole factory, casting-70 sand, glass factory's quartz sａnd and refilling pressure sand.Bucket Wheel Sａnd washing machine is widely used for cleaning materials in the following industries: quarry, minerals, building materials, transportation, chemical industry, water conservancy and hydropower, cement mixture station. So we design this machine ,which is mainly used for washing , selecting dewatering construction materials and sａnd materials.

1. The structure of the wheel washer sａnd washing machine is simple. The impeller drive bearing device is isolated from the water and the water-receiving material, which greatly avoids the phenomenon that the bearing is damaged by water immersion, sａnd and pollutants, and greatly reduces the accident rate.

2. The loss of fine sａnd and stone powder is very small, and the grading and fineness modulus of the washed building sａnd meets the standard requirements. The bucket type sａnd washing machine has almost no wearing parts except the screen mesh. It has a long service life and no maintenance for a long time.

3, sａnd stone washing machine is easy to maintain, large amount of processing, low power consumption, high cleaning. The novel sealing structure, fully sealed oil bath transmission and adjustable overflow slab ensure the high efficiency and durability of the series, good cleaning and dewatering effect, and the fine-grained products remain uncluttered.

The electric motor of sａnd washer runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sａnd and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sａnd is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sａnd and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sａnd and stone; on the other hand, the water can be fully used. Finally, the sａnd and stone goes to the out launder from the rotary impellor to finish the washing task.